Tough aluminum oxide abrasive is continuously. For use with angle grinders. The 10 aluminum oxide blades each have a 7/8" arbor and handle a maximum speed up to 13, 200 RPM. Fully reinforced with fiberglass mesh for added safety and controlled performance. Exposed during use to maintain an aggressive cutting edge.

Diameter: 4-1/2" grit: 40 arbor: 7/8" thickness: 1/16" maximum speed: 13, 200 RPM If you cut a lot of metal, then these cut-off wheels are sure to make the cut. 40 grit.

Ryobi P423 18V One+ Brushless 4-1/2" 10,400 RPM Grinder and Metal Cutter w/ Adjustable 3-Position Side Handle and Onboard Spanner Wrench Battery Not Included, Power Tool Only

Replacement is easy with the inclusion of an onboard spanner wrench. Even the guard is adjustable, letting you work from the ground or on a ceiling without too much exposure to sparks. One+ compatible: this 18v cordless power tool from ryobi works with the 18v batteries in Ryobi's lineup. Whether you're working on a plumbing job or are cutting metal down to size for a garage or other home improvement project, keep the Ryobi P423 in mind.

These models include the p100, p105, p107, p103, P104, P102, and P108. While a 4-1/2" wheel is included for general diy applications, you can always replace it. With a motor driving the grinding wheel up to 10, you're sure to cut through pvc, piping, 400 RPM No-load, welded metals, and more. Onboard spanner wrench: simplify your disc replacements.

This powerful, cordless grinder can slice through a variety of metals with ease and accuracy. Keep multiple wheels on hand for whatever job comes up, and you can have them replaced in seconds. Comfort grip handle: a rubber overmold covering the grip keeps up the friction between the tool and your hand, allowing for precise work in slippery environments.

3 position side handle: whatever angle you're attacking your job from, you'll be able to get the optimal leverage with the help of the onboard plastic handle that adjusts as you need it. This spanner is stored on the grinder, so you don't have to worry about losing it when you're switching discs out for multiple applications.

.


Similar products

4-1/2" Cut-off Wheels for Metal, for Cutting All Ferrous Metals and Stainless Steel
18-Volt ONE+ Cordless Brushless Jig Saw (Tool Only)
Ryobi P1837 18V One+ Cordless Brushless 3 Tool Combo Contractor Kit (9 pieces: Drill/Driver, Impact Driver, Circular Saw, 7-1/4 in Blade, Blade Wrench, Charger, 2.0 & 3.0 Ah Batteries, Bag)
Ryobi P122 4AH One+ High Capacity Lithium Ion Batteries For Ryobi Power Tools (2 Pack of P108 Batteries)
Ryobi P517 18V Lithium Ion Cordless Brushless 2,900 SPM Reciprocating Saw w/ Anti-Vibration Handle and Tool-Less Blade Changing (Battery Not Included, Power Tool Only)
Ryobi P531 One+ 18-Volt Cordless Speed Saw Rotary Cutter w/ Included Bits (Battery Not Included / Tool Only)
Ryobi 18-Volt Lithium + HP High Capacity 9.0 Ah Battery
Ryobi P108 4AH One+ High Capacity Lithium Ion Battery For Ryobi Power Tools (Single Battery)
Ryobi P261 18 Volt One+ 3-Speed 1/2 Inch Cordless Impact Wrench w/ 300 Foot Pounds of Torque and 3,200 IPM (Batteries Not Included, Power Tool Only)
Ryobi P601 One+ 18V Lithium Ion Cordless Fixed Base Trim Router (Battery Not Included – Tool Only)


Ryobi ZRP421 ONE Plus 18V Cordless 4-1/2" Angle Grinder Bare Tool

Gripzone over-mold for improved comfort with a positive grip. These models include the p100, p104, p103, p102, P105, P107, and P108. Genuine oem ryobi Tool - battery not included. Works with all ryobi 18-volt one+ batteries and charger not included. 3 position side handle: whatever angle you're attacking your job from, you'll be able to get the optimal leverage with the help of the onboard plastic handle that adjusts as you need it.

4-1/2 in. Comfort grip handle: a rubber overmold covering the grip keeps up the friction between the tool and your hand, allowing for precise work in slippery environments. Ryobi zrp421 one plus 18v cordless 4-1/2" angle Grinder Bare Tool Battery not included Onboard spanner wrench: simplify your disc replacements.

One+ compatible: this 18v cordless power tool from ryobi works with the 18v batteries in Ryobi's lineup. Tool-free guard adjustment: if you need to adjust the depth or angle of your cuts to suit different materials, you can do so with the push of a button. Grinding wheel and 3 position side handle included.

Compatible with various batteries including: p100, 105, P103, p104, P101, P102, P107 and P108. This spanner is stored on the grinder, so you don't have to worry about losing it when you're switching discs out for multiple applications.


Similar products

4-1/2" Cut-off Wheels for Metal, for Cutting All Ferrous Metals and Stainless Steel
DEWALT DW8062B5 4-1/2-Inch by 0.045-Inch Metal and Stainless Cutting Wheel, 7/8-Inch Arbor, 5-Pack
Ryobi P122 4AH One+ High Capacity Lithium Ion Batteries For Ryobi Power Tools (2 Pack of P108 Batteries)
Powilling 2Pack 5.0Ah 18V Replacement Battery for Ryobi 18V Lithium Battery P102 P103 P105 P107 P108 P109 Ryobi ONE+ Cordless Tool
Ryobi P7131 One+ 18V Lithium Ion Battery Powered Cordless Dry Debris Hand Vacuum with Crevice Tool (Batteries Not Included / Power Tool Only)
Ryobi P514 18V Cordless One+ Variable Speed Reciprocating Saw w/ 2 Blades (Batteries Not Included / Power Tool Only)
Ryobi ZRP320 ONE Plus 18V Cordless Lithium-Ion 2 in. Brad Nailer Battery and Charger Sold Separately (Renewed)
Ryobi P1813 One+ 18V Lithium Ion 750 Inch Pound Cordless Hammer Drill Power Tool Kit (Includes Battery Charger and Bag)
Ryobi One+ P5231 18V Lithium Ion Cordless Orbital T-Shaped 3,000 SPM Jigsaw (Battery Not Included, Power Tool and T-Shaped Wood Cutting Blade Only)
Ryobi P108 4AH One+ High Capacity Lithium Ion Battery For Ryobi Power Tools (Single Battery)


Neiko 11108A Aluminum Oxide Flap Disc | 4.5" x 7/8-Inch, 80 Grit, Flat Type #27-10 Pack

These models include the p100, p105, p102, p103, P107, P104, and P108. Genuine oem ryobi Tool - battery not included. Flap disc's are designed to run cooler to reduce warping of thin metal like body panels plus, unlike ordinary grinding wheels these discs won't gouge your work. Works with all ryobi 18-volt one+ batteries and charger not included.

. Constructed of industrial grade aluminum oxide abrasive material for strength, durability and extended disc life. Comfort grip handle: a rubber overmold covering the grip keeps up the friction between the tool and your hand, allowing for precise work in slippery environments. Flap disc use diagonal layers of aluminum oxide resin fiber, as it wears new grit is continuously being exposed for consistent performance throughout the life of the disc.

Tool-free guard adjustment: if you need to adjust the depth or angle of your cuts to suit different materials, you can do so with the push of a button. Compatible with various batteries including: p100, P103, p104, P102, P101, 105, P107 and P108.80 grit 4-1/2" flap disc makes it ideal for high performance grinding, contouring, blending, deburring, and finishing with smooth edges on sheet metals.

Flat type 27 disc construction clears rust and deburrs paint, steel and nonferrous metals including brass, copper, and lead.7/8-inch arbor size flap disc is compatible with angle grinders and can be operated with up to 13, 000 RPM. 3 position side handle: whatever angle you're attacking your job from, you'll be able to get the optimal leverage with the help of the onboard plastic handle that adjusts as you need it.




Similar products

DEWALT DW8062B5 4-1/2-Inch by 0.045-Inch Metal and Stainless Cutting Wheel, 7/8-Inch Arbor, 5-Pack
DEWALT DW4514 4-1/2-Inch by 1/4-Inch by 7/8-Inch Metal Grinding Wheel
50 Pack - 4.5"x.040"x7/8" Quality Thin Cut Off Wheels Metal & Stainless Steel
KSEIBI Aluminum Oxide 4 1/2 Inch Auto Body Flap Disc Sanding Grinding Wheel 10 Pack (120 Grit)
KSEIBI 686008 Aluminum Oxide 4 1/2 in Auto Body Flap Disc Sanding Grinding Wheel 10 Pack (40 Grit)
4-1/2" Cut-off Wheels for Metal, for Cutting All Ferrous Metals and Stainless Steel
25 Pack 4-1/2" x 1/16" x 7/8" Metal and Stainless Steel Cut Off Wheels - For Angle Grinders
Makita 10 Pack - 4.5" Grinding Wheel For Grinders - Aggressive Grinding For Metal - 4-1/2" x 1/4 x 7/8-Inch
Forney 72759 Wire Wheel Brush, Twist Knot with 5/8-Inch-11 Threaded Arbor, 4-inch-by-.020-Inch
5 Pack 4-1/2" x 1/4" x 7/8" Depressed Center Metal Grinding Wheels - For 4.5" Inch Angle Grinders


Ryobi P421 6500 RPM 4 1/2 Inch 18-Volt One+ Lithium Ion-Powered Angle Grinder Battery Not Included, Power Tool Only

Adjustable: side handle works in three different positions and the triggered grip rotates 90 degrees so you can fit this tool almost anywhere you would need to grind. Constructed of industrial grade aluminum oxide abrasive material for strength, durability and extended disc life. Onboard spanner wrench: simplify your disc replacements.

Compatible with various batteries including: p100, p104, P102, 105, P101, P103, P107 and P108.80 grit 4-1/2" flap disc makes it ideal for high performance grinding, deburring, contouring, blending, and finishing with smooth edges on sheet metals. Flat type 27 disc construction clears rust and deburrs paint, steel and nonferrous metals including brass, copper, and lead.

7/8-inch arbor size flap disc is compatible with angle grinders and can be operated with up to 13, 000 RPM. Grinding wheel included: Type 27 grinding wheel for metalworking or home improvement projects. Tool-free guard adjustment: if you need to adjust the depth or angle of your cuts to suit different materials, you can do so with the push of a button.

One+ compatible: this tool works with ryobi batteries from the one+ lithium ion series and also older NiCad Models Battery models include P100, P103, P105, P101, P107, P104, P102, P108. Comfortable handling: rubberized notched grip near the trigger allows you to handle this tool in most conditions with grease or oil on your hands.

These models include the p100, p104, p105, p103, P107, P102, and P108. Genuine oem ryobi Tool - battery not included.


Similar products

Premium Cut off Wheels 4 1/2 x 1/8 x 7/8-10 Pack for cutting all Ferrous Metal and Stainless Steel
4-1/2" Cut-off Wheels for Metal, for Cutting All Ferrous Metals and Stainless Steel
Ryobi One+ P523 18V Lithium Ion Cordless Orbital T Shank 3,000 SPM Jigsaw (Battery Not Included, Power Tool and T Shank Wood Cutting Blade Only)
Ryobi P531 One+ 18-Volt Cordless Speed Saw Rotary Cutter w/ Included Bits (Battery Not Included / Tool Only)
Ryobi P514 18V Cordless One+ Variable Speed Reciprocating Saw w/ 2 Blades (Batteries Not Included / Power Tool Only)
Ryobi One+ P5231 18V Lithium Ion Cordless Orbital T-Shaped 3,000 SPM Jigsaw (Battery Not Included, Power Tool and T-Shaped Wood Cutting Blade Only)
Ryobi P411 One+ 18 Volt 5 Inch Cordless Battery Operated Random Orbit Power Sander (Battery Not Included / Power Tool Only)
Ryobi P737 18-Volt ONE+ Portable Cordless Power Inflator for Tires (Battery Not Included, Power Tool Only)
Ryobi P108 4AH One+ High Capacity Lithium Ion Battery For Ryobi Power Tools (Single Battery)
Ryobi P261 18 Volt One+ 3-Speed 1/2 Inch Cordless Impact Wrench w/ 300 Foot Pounds of Torque and 3,200 IPM (Batteries Not Included, Power Tool Only)


PREMIUM GRINDING WHEELS for Grinders - Aggressive Aluminum Oxide Grain for Grinding all Ferrous Metals/Stainless Steel, Depressed Center - 4-1/2" x 1/4" x 7/8" - 6 PACK

Its aggressive grain concentration allows the grinding wheels to handle heavy-duty grinding of all ferrous metals, stainless steel, and hard alloys. Compatible with various batteries including: p100, P101, P103, p104, 105, P102, P107 and P108.80 grit 4-1/2" flap disc makes it ideal for high performance grinding, blending, deburring, contouring, and finishing with smooth edges on sheet metals.

Flat type 27 disc construction clears rust and deburrs paint, copper, steel and nonferrous metals including brass, and lead.7/8-inch arbor size flap disc is compatible with angle grinders and can be operated with up to 13, 000 RPM. Comfort grip handle: a rubber overmold covering the grip keeps up the friction between the tool and your hand, allowing for precise work in slippery environments.

Grinding wheel included: Type 27 grinding wheel for metalworking or home improvement projects. Adjustable: side handle works in three different positions and the triggered grip rotates 90 degrees so you can fit this tool almost anywhere you would need to grind. 4-1/2 in. One+ compatible: this 18v cordless power tool from ryobi works with the 18v batteries in Ryobi's lineup.

Tool-free guard adjustment: if you need to adjust the depth or angle of your cuts to suit different materials, you can do so with the push of a button. Grinding wheel and 3 position side handle included.


Similar products

4-1/2" Cut-off Wheels for Metal, for Cutting All Ferrous Metals and Stainless Steel
50 PACK - CUT OFF WHEELS 4 1/2 x 1/16 x 7/8 - For Cutting All Steel and Ferrous Metals.
50 Pack - 4.5"x.040"x7/8" Quality Thin Cut Off Wheels Metal & Stainless Steel
Neiko 11108A Aluminum Oxide Flap Disc | 4.5" x 7/8-Inch, 80 Grit, Flat Type #27-10 Pack
KSEIBI Aluminum Oxide 4 1/2 Inch Auto Body Flap Disc Sanding Grinding Wheel 10 Pack Type 27 (60 Grit)
DEWALT DW8062B5 4-1/2-Inch by 0.045-Inch Metal and Stainless Cutting Wheel, 7/8-Inch Arbor, 5-Pack
CHAOWISH Cutting Wheel 4.5“ Stainless Steel Durable Cutoff Discs 7/8” Arbor 3/64” Thick Fit Angle Grinder Well 10 Pack (4 1/2“)
Forney 72759 Wire Wheel Brush, Twist Knot with 5/8-Inch-11 Threaded Arbor, 4-inch-by-.020-Inch
Makita A-93859-5 14-Inch Cut-Off Wheel, 5-Pack
KSEIBI 686008 Aluminum Oxide 4 1/2 in Auto Body Flap Disc Sanding Grinding Wheel 10 Pack (40 Grit)


For 4.5" Inch Angle Grinders - 5 Pack 4-1/2" x 1/4" x 7/8" Depressed Center Metal Grinding Wheels

A24t aluminum oxide grains for Aggressive Grinding and High Stock Removal. The discs also come fitted with fiberglass mesh reinforcement for added safety. Comfort grip handle: a rubber overmold covering the grip keeps up the friction between the tool and your hand, allowing for precise work in slippery environments.

Works with all ryobi 18-volt one+ batteries and charger not included. Constructed of industrial grade aluminum oxide abrasive material for strength, durability and extended disc life. Onboard pin wrench included with the tool so you can easily replace grinder discs. One+ compatible: this tool works with ryobi batteries from the one+ lithium ion series and also older NiCad Models Battery models include P100, P103, P107, P104, P101, P102, P105, P108.

6 pack of 4 1/2" x 1/4" x 7/8" fiberglass reinforced disc - for added strength and Durability, MAX 13, 200 RPM. Grinding wheel included: Type 27 grinding wheel for metalworking or home improvement projects. This spanner is stored on the grinder, so you don't have to worry about losing it when you're switching discs out for multiple applications.

Gripzone over-mold for improved comfort with a positive grip. Tool-free guard adjustment: if you need to adjust the depth or angle of your cuts to suit different materials, you can do so with the push of a button. Designed to be attached to a 4-12" angle grinding that accepts 7/8" arbor holes, these discs can rip through metal and last well beyond the industry average.




Similar products

25 Pack 4-1/2" x 1/16" x 7/8" Metal and Stainless Steel Cut Off Wheels - For Angle Grinders
25 Pack Black Hawk 4-1/2" x .045 x 7/8" Arbor Depressed Center Cut Off Wheels - Metal & Stainless Steel Type 27
4-1/2" Cut-off Wheels for Metal, for Cutting All Ferrous Metals and Stainless Steel
Neiko 11108A Aluminum Oxide Flap Disc | 4.5" x 7/8-Inch, 80 Grit, Flat Type #27-10 Pack
CHAOWISH Cutting Wheel 4.5“ Stainless Steel Durable Cutoff Discs 7/8” Arbor 3/64” Thick Fit Angle Grinder Well 10 Pack (4 1/2“)
Makita 5 Pack - 4.5" Cut Off Wheels For Grinders - Aggressive Cutting For Metal & Stainless Steel/INOX - 4-1/2" x .045 x 7/8-Inch | Flat Cutting Wheels
DEWALT DW8062B5 4-1/2-Inch by 0.045-Inch Metal and Stainless Cutting Wheel, 7/8-Inch Arbor, 5-Pack
4.5" x 7/8" Premium Zirconia Flap Disc Grinding Wheel 40 Grit Type 29-10 Pack
50 Pack - 4.5"x.040"x7/8" Quality Thin Cut Off Wheels Metal & Stainless Steel
4.5" x 7/8" Premium High Density Jumbo Zirconia Type 29 Flap Disc 40 Grit - 10 Pack


DEWALT DW8062B5 4-1/2-Inch by 0.045-Inch Metal and Stainless Cutting Wheel, 7/8-Inch Arbor, 5-Pack

Comfortable handling: rubberized notched grip near the trigger allows you to handle this tool in most conditions with grease or oil on your hands. Onboard pin wrench included with the tool so you can easily replace grinder discs. Compatible with 4. 5" angle Grinder. Fast burr free cutting. High grain concentration - For Maximum Grinding Action and Smoother Running Wheels.

. This are highly durable. A24t aluminum oxide grains for Aggressive Grinding and High Stock Removal. Comfort grip handle: a rubber overmold covering the grip keeps up the friction between the tool and your hand, allowing for precise work in slippery environments. Tool-free guard adjustment: if you need to adjust the depth or angle of your cuts to suit different materials, you can do so with the push of a button.

One+ compatible: this 18v cordless power tool from ryobi works with the 18v batteries in Ryobi's lineup. 4-1/2" inch diameter x 1/4" inch Thickness x 7/8" Inch Arbor. Compatible with all 4-1/2 inch angle grinders with 7/8" arbor - Depressed Center. 2 full sheets of fiberglass for durability and safety. Constructed of industrial grade aluminum oxide abrasive material for strength, durability and extended disc life.

Onboard spanner wrench: simplify your disc replacements.


Similar products

DEWALT DW4514 4-1/2-Inch by 1/4-Inch by 7/8-Inch Metal Grinding Wheel
DEWALT DCG413B 20V MAX Brushless Cut Off Tool/Grinder (Tool Only)
DEWALT DW4725 High Performance 4-1/2-Inch Dry Cutting Continuous Rim Diamond Saw Blade with 7/8-Inch Arbor for Masonry
BLACK+DECKER BDEG400 6 Amp Angle Grinder, 4-1/2-Inch
DEWALT DW4910 3-Inch by 5/8-Inch-11 Knotted Cup Brush/Carbon Steel .020-Inch
DEWALT DWE402 4-1/2-Inch 11-Amp Paddle Switch Angle Grinder
Dewalt DCG412B 20V MAX* Lithium Ion 4-1/2” grinder (Tool Only)
DEWALT DWE402K 4-1/2-Inch 11-Amp Angle Grinder Kit
DEWALT DW4523 4-1/2-Inch by 1/4-Inch by 5/8-Inch General Purpose Metal Grinding Wheel
Neiko 11108A Aluminum Oxide Flap Disc | 4.5" x 7/8-Inch, 80 Grit, Flat Type #27-10 Pack


DEWALT DW4514 4-1/2-Inch by 1/4-Inch by 7/8-Inch Metal Grinding Wheel

This are easy to use. One+ compatible: this 18v cordless power tool from ryobi works with the 18v batteries in Ryobi's lineup. One+ compatible: this tool works with ryobi batteries from the one+ lithium ion series and also older NiCad Models Battery models include P100, P101, P103, P102, P105, P107, P104, P108.

6 pack of 4 1/2" x 1/4" x 7/8" fiberglass reinforced disc - for added strength and Durability, MAX 13, 200 RPM. 4-1/2" inch diameter x 1/4" inch Thickness x 7/8" Inch Arbor. High grain concentration - For Maximum Grinding Action and Smoother Running Wheels. This is manufactured in China. Proprietary aluminum oxide grain combination for aggressive cutting action.

Thin. 045-inch wheel design for fast burr free cutting. This are highly durable. This are easy to use. Dewalt dw4514 4-1/2-inch by 1/4-inch by 7/8-inch metal Grinding Wheel Onboard spanner wrench: simplify your disc replacements. Grinding wheel included: Type 27 grinding wheel for metalworking or home improvement projects.

High performance aluminum oxide grain - For Long Life and Aggressive Material Removal. Gripzone over-mold for improved comfort with a positive grip.


Similar products

DEWALT DW8062B5 4-1/2-Inch by 0.045-Inch Metal and Stainless Cutting Wheel, 7/8-Inch Arbor, 5-Pack
DEWALT DWE402 4-1/2-Inch 11-Amp Paddle Switch Angle Grinder
DEWALT DWE402K 4-1/2-Inch 11-Amp Angle Grinder Kit
DEWALT DCG413B 20V MAX Brushless Cut Off Tool/Grinder (Tool Only)
Dewalt DCG412B 20V MAX* Lithium Ion 4-1/2” grinder (Tool Only)
BLACK+DECKER BDEG400 6 Amp Angle Grinder, 4-1/2-Inch
DEWALT DW4725 High Performance 4-1/2-Inch Dry Cutting Continuous Rim Diamond Saw Blade with 7/8-Inch Arbor for Masonry
DEWALT DW4910 3-Inch by 5/8-Inch-11 Knotted Cup Brush/Carbon Steel .020-Inch
DEWALT DW8424B5 4-1/2-Inch by 0.045-Inch Metal Cutting Wheel, 7/8-Inch Arbor, 5-Pack
DEWALT DW4920 3-Inch by 5/8-Inch-11 Crimped Cup Brush/Carbon Steel .014-Inch


KSEIBI Aluminum Oxide 4 1/2 Inch Auto Body Flap Disc Sanding Grinding Wheel 10 Pack Type 27 60 Grit

This are highly durable. This is manufactured in China. This spanner is stored on the grinder, so you don't have to worry about losing it when you're switching discs out for multiple applications. Fast burr free cutting. 4-1/2 in. 2 full sheets of fiberglass for durability and safety. 3 position side handle: whatever angle you're attacking your job from, you'll be able to get the optimal leverage with the help of the onboard plastic handle that adjusts as you need it.

Grinding wheel included: Type 27 grinding wheel for metalworking or home improvement projects. 3 full sheets of fiberglass for durability and safety. This are highly durable. Comfort grip handle: a rubber overmold covering the grip keeps up the friction between the tool and your hand, allowing for precise work in slippery environments.

Proprietary material mix ensures durable long life wheels. Onboard pin wrench included with the tool so you can easily replace grinder discs. Compatible with various batteries including: p100, p104, P102, P101, P103, 105, P107 and P108.80 grit 4-1/2" flap disc makes it ideal for high performance grinding, blending, deburring, contouring, and finishing with smooth edges on sheet metals.

Flat type 27 disc construction clears rust and deburrs paint, copper, steel and nonferrous metals including brass, and lead.7/8-inch arbor size flap disc is compatible with angle grinders and can be operated with up to 13, 000 RPM.


Similar products

DEWALT DW8062B5 4-1/2-Inch by 0.045-Inch Metal and Stainless Cutting Wheel, 7/8-Inch Arbor, 5-Pack
Neiko 11108A Aluminum Oxide Flap Disc | 4.5" x 7/8-Inch, 80 Grit, Flat Type #27-10 Pack
DEWALT DW4514 4-1/2-Inch by 1/4-Inch by 7/8-Inch Metal Grinding Wheel
50 Pack - 4.5"x.040"x7/8" Quality Thin Cut Off Wheels Metal & Stainless Steel
4-1/2" Cut-off Wheels for Metal, for Cutting All Ferrous Metals and Stainless Steel
50 PACK - CUT OFF WHEELS 4 1/2 x 1/16 x 7/8 - For Cutting All Steel and Ferrous Metals.
5 Pack 4-1/2" x 1/4" x 7/8" Depressed Center Metal Grinding Wheels - For 4.5" Inch Angle Grinders
Makita 10 Pack - 4.5" Grinding Wheel For Grinders - Aggressive Grinding For Metal - 4-1/2" x 1/4 x 7/8-Inch
Makita 5 Pack - 4 1 2 Grinding Wheel For Grinders - Aggressive Grinding For Metal - 4-1/2" x 1/4 x 7/8-Inch | Depressed
KSEIBI 686040A Zirconia Corundum 4 1/2 Inch Flap Disc Sanding Grinding Wheel (Grit #120, 10Pack)


Ryobi ZRP421 ONE Plus 18V Cordless Lithium-Ion 4-1/2 in. Angle Grinder Bare Tool Certified Refurbished

High performance aluminum oxide grain - For Long Life and Aggressive Material Removal. Grinding wheel and 3 position side handle included. 3-position side handle allows handle to be placed in most comfortable position. Fiberglass Reinforced for Saftey. Onboard spanner wrench: simplify your disc replacements. 2 full sheets of fiberglass for durability and safety.

Compatible with various batteries including: p100, P103, P102, P101, 105, p104, P107 and P108.80 grit 4-1/2" flap disc makes it ideal for high performance grinding, deburring, blending, contouring, and finishing with smooth edges on sheet metals. Flat type 27 disc construction clears rust and deburrs paint, steel and nonferrous metals including brass, copper, and lead.

7/8-inch arbor size flap disc is compatible with angle grinders and can be operated with up to 13, 000 RPM. Tool-less guard makes positioning guard easy. High performance aluminum oxide grain for long life and high material removal. One+ compatible: this 18v cordless power tool from ryobi works with the 18v batteries in Ryobi's lineup.

One+ compatible: this tool works with ryobi batteries from the one+ lithium ion series and also older NiCad Models Battery models include P100, P104, P107, P105, P103, P102, P101, P108.6 pack of 4 1/2" x 1/4" x 7/8" fiberglass reinforced disc - for added strength and Durability, MAX 13, 200 RPM. Tool-free guard adjustment: if you need to adjust the depth or angle of your cuts to suit different materials, you can do so with the push of a button.




Similar products

4-1/2" Cut-off Wheels for Metal, for Cutting All Ferrous Metals and Stainless Steel
Ryobi P261 18 Volt One+ 3-Speed 1/2 Inch Cordless Impact Wrench w/ 300 Foot Pounds of Torque and 3,200 IPM (Batteries Not Included, Power Tool Only)
Ryobi P514 18V Cordless One+ Variable Speed Reciprocating Saw w/ 2 Blades (Batteries Not Included / Power Tool Only)
Ryobi P122 4AH One+ High Capacity Lithium Ion Batteries For Ryobi Power Tools (2 Pack of P108 Batteries)
Ryobi One P505 18V Lithium Ion Cordless 5 1/2" 4,700 RPM Circular Saw (Battery Not Included, Power Tool Only), Green
Ryobi P737 18-Volt ONE+ Portable Cordless Power Inflator for Tires (Battery Not Included, Power Tool Only)
Ryobi ZRP320 ONE Plus 18V Cordless Lithium-Ion 2 in. Brad Nailer Battery and Charger Sold Separately (Renewed)
Neiko 11108A Aluminum Oxide Flap Disc | 4.5" x 7/8-Inch, 80 Grit, Flat Type #27-10 Pack
Ryobi P731 One+ 18v Dual Function Power Inflator/Deflator Cordless Air Compressor Kit w/ Adapters (Battery Not Included, Tool Only)
Ryobi JobPLUS ONE+ 18V Multi Tool P246 Console & P570 Head Attachment and Accessories Shown