#ad
#ad
Aootech #ad - Warning this misting nozzle does not have a filtering device. Best choice for Outdoor Use With Cold Water. Screw into any 10/24-Threaded Mist Nozzle Opening. Operation pressure:20-70kg/Cm. Please make sure that there is no debris in the water when you use it. From the manufacturer this misting nozzle does not need to use air compressed, can use liquid pressure to form a very fine mist, good effect, excellent misting effect, low cost, energy and water saving, no leakage.

Flow rate:80-145ml/Min. Minimal water use of 1/2 gallon Of Water Per Hour Per Nozzle. Nozzle can fully spray use the pressure of tap water. A filter on your mist system is highly recommended. The nozzle requires simple maintenance; soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage.

Aootech Brass Misting Nozzles for Outdoor Cooling System 22 pcs,0.012" Orifice 0.3 mm 10/24 UNC #ad - Plugged up Nozzles are not covered by any warranty. This can avoid clogging. Included in the package: 22 x brass Misting Nozzles High cost performance:20pcs+2pcsExtra Bonus=22pcs. High quality: made of brass, never Rust. Use of precision nozzle keypunch, sophisticated production, saving more than 10 times cost compared with the humidifier.

More information about Aootech #ad

Orbit 20066 Portable 1/4-Inch Outdoor Mist Cooling System

#ad
#ad
Orbit 20066 #ad - Orbit 20066 Portable 1/4-Inch Outdoor Mist Cooling System #ad - 10-feet of mist cooling coverage. 4 year warranty. Cools the surrounding air temperatures up to 20 degrees. Installs in less than 10 minutes. Great for cooling your outdoor living areas. The orbit 30060 arizona outdoor misting system basic Cooling Set is 10-feet of preassembled, ready-to-use, flexible misting line to help cool surrounding air temperature up to 20 degrees Fahrenheit.

More information about Orbit 20066 #ad


Similar products



MistyMate 16030 Cool Patio 30 Outdoor Misting Kit

#ad
#ad
MistyMate 16030 #ad - 10-feet of mist cooling coverage. Cools the surrounding air temperatures up to 20 degrees. The ultimate upgrade to your outdoor lifestyle. Great for cooling your outdoor living areas. 1/2-inch uv resistant, Nylon Braided hose. Installs in less than 10 minutes. Attaches to a garden hose or outdoor spigot and operates off of standard water pressure.

16 micromist technology misting nozzles. 16 plastic nozzle fittings preassembled on the Mist Line with 2-feet spacing. 4 year warranty. This mega-system comes pre-assembled, complete with 16 of our exclusive MicroMist nozzles that deliver a continuous stream of ultra-fine mist, and can cool the ambient temperature up to 30-degree F.

MistyMate 16030 Cool Patio 30 Outdoor Misting Kit #ad - 32 mounting Brackets. The professional grade Cool Patio 30 system provides a cool environment from the heat for your favorite outdoor areas. 30-feet of mist line and10-feet of Supply Line preassembled to the Mist Line. Once the mist touches the skin, it flash-evaporates on contact ensuring a mild climate in even the hottest environments.

More information about MistyMate 16030 #ad


Similar products



WaterSentinel WS-21 Calcium Inhibitor Filter and Misting System Protector

#ad
#ad
Water Sentinel WS-21 #ad - 30-feet of mist line and10-feet of Supply Line preassembled to the Mist Line. Additionally, this filter can catalytically breakdown other impurities very similar to the way a catalytic converter works in your automobile. These processes ensure that you are getting the cleanest and best tasting water possible.

16 micromist technology misting nozzles. Attaches to a garden hose or outdoor spigot and operates off of standard water pressure. Quick, 1-step installation with the same OEM performances. Prolongs nozzle life by preventing scale buildup from clogging up. For use with all outdoor cooling systems. Watersentinel brand ensures the highest standard.

WaterSentinel WS-21 Calcium Inhibitor Filter and Misting System Protector #ad - 102 day warranty against manufacturer defects from date of sale with invoice from WaterSentinel. 4 year warranty. The carbon block has millions of active sites on its surface and within the structure which can absorb impurities like a sponge, and can absorb and hold other types of impurities on its surface like a magnet.

Keeps your mist cooling system operating at peak performance. Prolongs nozzle life by preventing scale buildup from clogging up. Cools the surrounding air temperatures up to 20 degrees.

More information about Water Sentinel WS-21 #ad


Similar products



Orbit 20070 Performance 1/2" PVC Outdoor Mist Cooling System

#ad
#ad
Orbit 20070 #ad - Enjoy the outdoors again with the Orbit performance 1/2" PVC mist cooling system. Of 1/2-in. Connects to a standard outdoor faucet - do not use with a booster pump. It also works equally well for animal Shelters & Dog runs, while reducing surrounding temperature up to 20 Degree Fahrenheit. It is the perfect rigid cooling solution for home patios & outdoor Recreational areas.

Pvc tubing lengths, 3 pvc elbows, 9 hanging clamps, swivel hose adapter, 7 PVC mist couplings, 6 mist nozzles, 1 PVC end cap, 1 hose washer, 1 automatic drain valve, 1, 2 PVC couplings, 1 PVC cement. Of mist area. Prolongs nozzle life by preventing scale buildup from clogging up. 12 feet of linear mist cooling 24 sq.

Orbit 20070 Performance 1/2" PVC Outdoor Mist Cooling System #ad - Perfect cooling solution for home patios and outdoor recreational areas. Includes: 9 22-in. 16 micromist technology misting nozzles. Attaches to a garden hose or outdoor spigot and operates off of standard water pressure. Quick, 1-step installation with the same OEM performances. Prolongs nozzle life by preventing scale buildup from clogging up.

For use with all outdoor cooling systems.

More information about Orbit 20070 #ad


Similar products



MistyMate 16020 Cool Patio 20 Outdoor Misting Kit

#ad
#ad
MistyMate 16020 #ad - Perfect for all outdoor mist cooling systems. 10-feet of supply Line preassembled to the Mist Line. 32 mounting Brackets. Expandable up to 250 feet 125 nozzles with appropriate pressure. Keeps your mist cooling system operating at peak performance. For outdoor use with cold water Only. Attaches to a garden hose or outdoor spigot and operates off of standard water pressure.

MistyMate 16020 Cool Patio 20 Outdoor Misting Kit #ad - 11 plastic nozzle fittings preassembled on the Mist Line with 2-feet spacing. Of mist area. 30-feet of mist line and10-feet of Supply Line preassembled to the Mist Line. Attaches to a garden hose or outdoor spigot and operates off of standard water pressure. Quick, 1-step installation with the same OEM performances.

Prolongs nozzle life by preventing scale buildup from clogging up. For use with all outdoor cooling systems. Watersentinel brand ensures the highest standard. 102 day warranty against manufacturer defects from date of sale with invoice from WaterSentinel. 20-feet of mist line. Installs in less than 10 minutes.

More information about MistyMate 16020 #ad


Similar products



mistcooling 3/4" Inlet and Outlet Size Misting System Calcium Inhibitor Filter, 6 Month Life

#ad
#ad
Mistcooling 3/4 " Inlet and Outlet Size #ad - Perfect cooling solution for home patios and outdoor recreational areas. Installs in less than 10 minutes. For customer service call 866-218-8473. Prolongs nozzle life by preventing scale buildup from clogging up. Range: 40 - 100 f inlet connection: 3/4'' fht outlet connection: 3/4'' mht pressure Range: 20 125 PSI Gallons Per Minute: About 1 GPM Dimensions: 6" length x 2" diameter.

For outdoor use with cold water Only. 30-feet of mist line and10-feet of Supply Line preassembled to the Mist Line. 1/2-inch uv resistant, Nylon Braided hose. Of mist area. 4 year warranty. 11 plastic nozzle fittings preassembled on the Mist Line with 2-feet spacing. Filter media: poly phosphate filter life: about 2, dirt, 000 gallons or 6 months Reduces: Chlorine as well as sediment, rust, and other impurities down to 5 microns.

mistcooling 3/4" Inlet and Outlet Size Misting System Calcium Inhibitor Filter, 6 Month Life #ad - 5 micron poly phosphate filter prevents clogging of mist nozzles 6 Months Life Easy installation Simply attaches to any Outdoor Spigot or garden hose. Great for cooling your outdoor living areas. Simple instalation and use. Cools the surrounding air temperatures up to 20 degrees. They swiftly breakdown the large water particles into millions of tiny droplets - and as you may know, the faster they are absorbed, thereby creating a cool zone immediately.

More information about Mistcooling 3/4 " Inlet and Outlet Size #ad


Similar products



Orbit Arizona Outdoor Misting System 4-Inch Nozzle Extension 5-Pack 10056H

#ad
#ad
Orbit 10056H #ad - Great for cooling your outdoor living areas. 1/2-inch uv resistant, Nylon Braided hose. Ft. 22 mounting Brackets. For outdoor use with cold water Only. It helps remove mineral content like sediments and impurities, as well as dust and dirt from the nozzles, ensuring your system nozzles remain unclogged and work with high efficiency.

When the nozzles are clean and unclogged, they tend to work their best. Keeps your mist cooling system operating at peak performance. With this water filter, the smaller the droplets, you can rest assured that your nozzles will remain free from clogging up to as long as 6 months. Micron rating: 5 temp. Proudly manufactured in America with US based customer service.

Orbit Arizona Outdoor Misting System 4-Inch Nozzle Extension 5-Pack 10056H #ad - The 4" flexible mist nozzle extension has a 10/24 Nozzle Thread that can be used place of a standard Mist Nozzle. Connects to a standard outdoor faucet - do not use with a booster pump. Attaches to a garden hose or outdoor spigot and operates off of standard water pressure. This is a high-quality and easy to install 6x2 water filter model mc601 featuring 5 micron poly-phosphate filter that attaches smoothly and directly to your low and mid-pressure mist cooling systems/hose bibb.

The filter is designed for performance. Filter media: poly phosphate filter life: about 2, 000 gallons or 6 months Reduces: Chlorine as well as sediment, rust, dirt, and other impurities down to 5 microns.

More information about Orbit 10056H #ad


Similar products



2 Pack 10 Total Couplings Orbit 1/2 Inch PVC Coupling with Brass and Stainless Steel Mist Nozzle - 5 Pack

#ad
#ad
Orbit #ad - 12 feet of linear mist cooling 24 sq. It helps remove mineral content like sediments and impurities, as well as dust and dirt from the nozzles, ensuring your system nozzles remain unclogged and work with high efficiency. When the nozzles are clean and unclogged, they tend to work their best. Can be used to extend the misting nozzle around obstacles.

This mist part is designed to connect two 2-foot sections of PVC mist system pipe together. 10-feet of supply Line preassembled to the Mist Line. Expandable up to 250 feet 125 nozzles with appropriate pressure. Keeps your mist cooling system operating at peak performance. With this water filter, the smaller the droplets, you can rest assured that your nozzles will remain free from clogging up to as long as 6 months.

2 Pack 10 Total Couplings Orbit 1/2 Inch PVC Coupling with Brass and Stainless Steel Mist Nozzle - 5 Pack #ad - Micron rating: 5 temp. 4 year warranty. Attaches to a garden hose or outdoor spigot and operates off of standard water pressure. This is a high-quality and easy to install 6x2 water filter model mc601 featuring 5 micron poly-phosphate filter that attaches smoothly and directly to your low and mid-pressure mist cooling systems/hose bibb.

The filter is designed for performance. Attaches to a garden hose or outdoor spigot and operates off of standard water pressure.

More information about Orbit #ad


Similar products



Orbit Arizona Mist 10115H 3/8-Inch Misting Brass Auto Drain Valve

#ad
#ad
Orbit Underground/Sunmate 10115H #ad - It helps remove mineral content like sediments and impurities, as well as dust and dirt from the nozzles, ensuring your system nozzles remain unclogged and work with high efficiency. When the nozzles are clean and unclogged, they tend to work their best. Expandable up to 250 feet 125 nozzles with appropriate pressure.

Range: 40 - 100 f inlet connection: 3/4'' fht outlet connection: 3/4'' mht pressure Range: 20 125 PSI Gallons Per Minute: About 1 GPM Dimensions: 6" length x 2" diameter. They swiftly breakdown the large water particles into millions of tiny droplets - and as you may know, the faster they are absorbed, thereby creating a cool zone immediately.

Orbit Arizona Mist 10115H 3/8-Inch Misting Brass Auto Drain Valve #ad - Attaches to a garden hose or outdoor spigot and operates off of standard water pressure. Quick, 1-step installation with the same OEM performances. Prolongs nozzle life by preventing scale buildup from clogging up. For use with all outdoor cooling systems. Watersentinel brand ensures the highest standard. 102 day warranty against manufacturer defects from date of sale with invoice from WaterSentinel.

Keeps your mist cooling system operating at peak performance. Filter media: poly phosphate filter life: about 2, 000 gallons or 6 months Reduces: Chlorine as well as sediment, rust, dirt, and other impurities down to 5 microns.

More information about Orbit Underground/Sunmate 10115H #ad


Similar products



Dreamtop 10pcs 1/4" Slip-Lok Misting Nozzle Tees with 1pc Plug for Cooling System 10/24 UNC

#ad
#ad
Dreamtop #ad - 11 plastic nozzle fittings preassembled on the Mist Line with 2-feet spacing. 10-feet of supply Line preassembled to the Mist Line. Connects to a standard outdoor faucet - do not use with a booster pump. For outdoor use with cold water Only. Simple instalation and use. With this water filter, the smaller the droplets, you can rest assured that your nozzles will remain free from clogging up to as long as 6 months.

Micron rating: 5 temp. Easy to install. 20-feet of mist line. Specifications: size: 1/4'' color: blackpackage Includes: 10 X Slip-Lok Misting Nozzle Tees 1 X Plug Great for cooling your outdoor living areas. Material: Plastic. Proudly manufactured in America with US based customer service. Prevents premature mist nozzle clgging and prolongs the life of your misting system.

Dreamtop 10pcs 1/4" Slip-Lok Misting Nozzle Tees with 1pc Plug for Cooling System 10/24 UNC #ad - It helps remove mineral content like sediments and impurities, as well as dust and dirt from the nozzles, ensuring your system nozzles remain unclogged and work with high efficiency. When the nozzles are clean and unclogged, they tend to work their best. 10-feet of mist cooling coverage. The perfect solution to your outdoor cooling needs.

More information about Dreamtop #ad


Similar products