#ad
#ad
Micro Swiss LLC #ad - Orifice size:. 4mm. Upgrade nozzle for robo r1/r1 +PLUS, Robo C2, Robo R2. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. Made in usa by Micro Swiss. This coating is also very hard and abrasion resistant. 1. 75mm Filament. If you are working with abrasive carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle.

. Nozzle plated with twinclad xt coating higH LUBRICITY WEAR RESISTANT. This is micro swiss nozzle for Robo 3D Printers, M6 thread, 1. 75mm filament, Hexagon style hotend. It is made from a 360 brass base material and plated with TwinClad XT coating. Twinclad xt is a nickel composite coating designed for very low friction.

More information about Micro Swiss LLC #ad

Kamo 5PCS 0.4mm Drill Bits for 3D MakerBot Printer Nozzle Cleaning Kit

#ad
#ad
Kamo #ad - The length of shank: 20mm. Don't use the drill to clean until the nozzle is heated to above 200 degrees. Please note: kamo is a registered trademark and authorized seller in USA, plese check carefully before you buy. Package included: 5 x 04mm drill Bits. The bit length: 16mm. Specifications: Bit diameter: 0

4mm the bit length: 16mm the length of shank: 20mm please kindly note: Don't use the drill to clean until the nozzle is heated to above 200 degrees! Package Included: 5 x 04mm drill bits Bit diameter: 04mm.

More information about Kamo #ad


Similar products



eSUN 3D Printer CLEANING Filament 1.75mm Natural 0.1kg for all 1.75mm FDM 3D Printers, 1.75mm Cleaning

#ad
#ad
eSUN CLN175N01 #ad - Will not clog extruder. Clean the 3d printer's extruder before and after printing for better extruder protection. Not easy to degrade in the heat. Don't use the drill to clean until the nozzle is heated to above 200 degrees. Maintenance is important to the longevity and functionality of extruders. The length of shank: 20mm.

The bit length: 16mm. Industry's first 3D cleaning filament. Package included: 5 x 04mm drill Bits. Color: white semi-transparent Weight: 01kg length: about 120 Feet Patent Pending Bit diameter: 04mm. Excellent heat stability, Wide cleaning temperature range of 150 to 260 celsius. Cleans the extruder's interior by removing accumulated residual filaments.

eSUN 3D Printer CLEANING Filament 1.75mm Natural 0.1kg for all 1.75mm FDM 3D Printers, 1.75mm Cleaning #ad - Possesses a certain level of adhesive quality. Excellent heat stability. Wide cleaning temperature range of 150 to 260 Celsius. Industry's first 3d Printer Cleaning Filament used to clean up residues inside extruders. Using cleaning filament can prevent nozzle plugging during transition between high and low temperature materials.

More information about eSUN CLN175N01 #ad


Similar products



HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Black

#ad
#ad
HATCHBOX 3D PLA-1KG1.75-BLK #ad - 1. 75mm filament diameter Dimensional Accuracy +/- 003mm. The length of shank: 20mm. Welcome to hatchbox 3d products our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. Excellent heat stability, Wide cleaning temperature range of 150 to 260 celsius.

Cleans the extruder's interior by removing accumulated residual filaments. Possesses a certain level of adhesive quality. Because of the lower melting temperatures and lack of warping, PLA filaments retain their color vibrancy and are a common choice for displays or small household prints. Pla polylactic acid 3d Printer Filament Vacuumed Sealed With Desiccant.

HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Black #ad - Recommended extrusion/nozzle temperature 180°C - 210°C 356°F - 410°F. The filaments are universally designed and compatible with 3D Printers using 1. 75mm diameter filament, with a dimensional accuracy of +/- 003mm. Pla, or polylactic acid, is a commonly used thermoplastic material that does not require the use of a heated print bed.

Spool diameter: 7. 88" - spool width: 2.

More information about HATCHBOX 3D PLA-1KG1.75-BLK #ad


Similar products



WAHHING 10PCS 2mm thick heating block cotton For 3D printer hotend nozzle heat insulation

#ad
#ad
WAHHING #ad - Bit diameter: 04mm. Description wahhing heating block Cotton is manufactured from ceramic fiber paper and High Temperature Film as main raw material. You can punch holes or Cut fit size to the cotton. Heat preservation, keep heater block and consumable work better. Size: 3. 35in/85mm x 08in/20mm x 008in/2mm +/-0

05in. The bit length: 16mm. The length of shank: 20mm. Recommended extrusion/nozzle temperature 180°C - 210°C 356°F - 410°F. Important safety guide ★wahhing heater block cotton safe working temperature: <300°c★this heater block cotton in normal working, and the color will turn into dark brown and black is normal, may be appear some slight smoke, it will not burn! please feel relieved to use! ★Must pay attention to the Safe working temperature of the 3D printer's consumable and accessories, May cause high temperature hazards!! PLA 190°C-230°CABS 230°C-250°C Heater Block Cotton<300°C WARNING!! ►Keep away from children.

WAHHING 10PCS 2mm thick heating block cotton For 3D printer hotend nozzle heat insulation #ad - Please read your 3D printer manual carefully before installing and using it. 3d printer replacement parts, Always shut off power to the circuit before starting installation work. This product is designed for 3D printers, don't use it outdoor and shut off power before starting installation work. 3d printer accessories temperature can be very high, pay attention to safety!►Due to the variety of possible end-uses, it is ultimately the responsibility of the customer to determine a product's suitability for a particular application.

Pla polylactic acid 3d Printer Filament Vacuumed Sealed With Desiccant.

More information about WAHHING #ad


Similar products



HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, White

#ad
#ad
HATCHBOX 3D PLA-1KG1.75-WHT #ad - You can punch holes or Cut fit size to the cotton. Heat preservation, keep heater block and consumable work better. Size: 3. 35in/85mm x 08in/20mm x 008in/2mm +/-005in. Pla polylactic acid 3d Printer Filament Vacuumed Sealed With Desiccant. Spool diameter: 7. 88" - spool width: 2. 69" - spool hub Hole Diameter: 2. 20".

Spool diameter: 7. 88" - spool width: 2. 69" - spool hub Hole Diameter: 2. 20". Pla polylactic acid 3d Printer Filament Vacuumed Sealed With Desiccant. Package: 10 pcs * waHHING heater block cottons. 1 kg approximately 2. 20 lbs Spool. Excellent heat stability, Wide cleaning temperature range of 150 to 260 celsius. Cleans the extruder's interior by removing accumulated residual filaments.

HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, White #ad - Possesses a certain level of adhesive quality. The length of shank: 20mm. 1.

More information about HATCHBOX 3D PLA-1KG1.75-WHT #ad


Similar products



PTFE Teflon Bowden Tube for 1.75 Filament 2.0mm ID/4.0mm OD – White Connector Tubing for 3D Printer - 2.0 Meters

#ad
#ad
AMX3d #ad - Excellent heat stability, Wide cleaning temperature range of 150 to 260 celsius. Cleans the extruder's interior by removing accumulated residual filaments. Possesses a certain level of adhesive quality. Amx3d 3d printing tools Great 3D prints start with the best tools. Recommend safe working Temperature : <300°C.

Ptfe bowden tubing replace or upgrade your Bowden tubes with this PTFE Teflon tubing. Designed with 2mm id and 4mm OD, the 3D printer tubing is suitable for 1. 75mm filament, and is generally used with a PC4-M6 type push-in fitting. Package included: 5 x 04mm drill Bits. Pla polylactic acid 3d Printer Filament Vacuumed Sealed With Desiccant.

PTFE Teflon Bowden Tube for 1.75 Filament 2.0mm ID/4.0mm OD – White Connector Tubing for 3D Printer - 2.0 Meters #ad - You can punch holes or Cut fit size to the cotton. Heat preservation, keep heater block and consumable work better. Size: 3. 35in/85mm x 08in/20mm x 008in/2mm +/-005in.

More information about AMX3d #ad


Similar products



M6 Thread 1.75mm Filament Hexagon - Micro Swiss Plated Wear Resistant Nozzle .5mm for Robo 3D

#ad
#ad
Micro Swiss LLC #ad - This is micro swiss nozzle for Robo 3D Printers, M6 thread, 1. 75mm filament, Hexagon style hotend. Upgrade nozzle for robo r1/r1 +PLUS, Robo C2, Robo R2. You can punch holes or Cut fit size to the cotton. Heat preservation, keep heater block and consumable work better. Size: 3. 35in/85mm x 08in/20mm x 008in/2mm +/-0

05in. Excellent heat stability, Wide cleaning temperature range of 150 to 260 celsius. Cleans the extruder's interior by removing accumulated residual filaments. Possesses a certain level of adhesive quality. Nozzle plated with twinclad xt coating higH LUBRICITY WEAR RESISTANT. The bit length: 16mm. Improve prints: regular bowden tube cleaning can cause wear, and extruder grinding reduces print quality.

M6 Thread 1.75mm Filament Hexagon - Micro Swiss Plated Wear Resistant Nozzle .5mm for Robo 3D #ad - 1. 75mm Filament. Pla polylactic acid 3d Printer Filament Vacuumed Sealed With Desiccant. Recommended extrusion/nozzle temperature 180°C - 210°C 356°F - 410°F. Packaged without ties to prevent crimping.

More information about Micro Swiss LLC #ad


Similar products



HATCHBOX 3D Printer Filament, Dimensional Accuracy +/- 0.03mm, 1.75 mm, 1 kg Spool, Wood

#ad
#ad
HATCHBOX 3D WOOD-1KG1.75 #ad - 1. 75mm filament diameter Dimensional Accuracy +/- 003mm. If there are any problems with your Bowden Tube just let us know!1. 75mm filament diameter Dimensional Accuracy +/- 003mm. Bit diameter: 04mm. Recommend safe working Temperature : <300°C. The length of shank: 20mm. You'll be able to sand and stain the finish product if you wish.

1. 75mm filament diameter Dimensional Accuracy +/- 003mm. Why we love it: less warping Easy to use No heated bed required. Recommended extrusion/nozzle temperature 180°C - 210°C 356°F - 410°F. Package: 10 pcs * waHHING heater block cottons. 1 kg approximately 2. 20 lbs Spool. Spool diameter: 7. 88" - spool width: 2.

HATCHBOX 3D Printer Filament, Dimensional Accuracy +/- 0.03mm, 1.75 mm, 1 kg Spool, Wood #ad - 69" - spool hub Hole Diameter: 2. 20". Blending a mixture of plant-based materials, polymers, and wood particles creates HATHCHBOX 3D Printer's Wood PLA Hybrid, making this material more earth- friendly.

More information about HATCHBOX 3D WOOD-1KG1.75 #ad


Similar products



HATCHBOX ABS 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Black

#ad
#ad
HATCHBOX 3D ABS-1KG1.75-BLK #ad - Abs can be used for full functional models, and is the closest material to real production models. The filaments are universally designed and compatible with 3D Printers using 1. 75mm diameter filament, with a dimensional accuracy of +/- 003mm. Recommended extrusion/nozzle temperature 180°C - 210°C 356°F - 410°F.

If there are any problems with your Bowden Tube just let us know! Recommend safe working Temperature : <300°C. Welcome to hatchbox 3d products our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality.

HATCHBOX ABS 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Black #ad - Spool diameter: 7. 88" - spool width: 2. 69" - spool hub Hole Diameter: 2. 20". Packaged without ties to prevent crimping. Amx3d accessories: the best 3d prints start with the best tools! AMX3d provides 3D printing partsof the highest quality. 1. 75mm Filament. Upgrade nozzle for robo r1/r1 +PLUS, Robo C2, Robo R2. 1.

More information about HATCHBOX 3D ABS-1KG1.75-BLK #ad


Similar products



BuildTak 3D Printing Build Surface, 8" x 8" Square, Black Pack of 3

#ad
#ad
Ideal Jacobs Corporation BT08x08-3PK #ad - You can punch holes or Cut fit size to the cotton. Heat preservation, keep heater block and consumable work better. Size: 3. 35in/85mm x 08in/20mm x 008in/2mm +/-005in. If there are any problems with your Bowden Tube just let us know! Build sheet adheres to a print bed to help the filament stick during printing, while also enabling clean removal of the printed part afterward.

Abs acrylonitrile butadiene Styrene 3D Printer Filament Vacuumed Sealed With Desiccant. Single sheet design installs more quickly and with fewer bubbles than tape or films. 1. 75mm filament diameter Dimensional Accuracy +/- 003mm. Compatible with abs, pla, pet+, hips, brick, wood, and flexible TPE filaments sold separately.

BuildTak 3D Printing Build Surface, 8" x 8" Square, Black Pack of 3 #ad - Durable construction allows for multiple uses with either the same or different filament material. Recommended extrusion/nozzle temperature 180°C - 210°C 356°F - 410°F. Orifice size:. 5mm. 1 kg approximately 2. 20 lbs Spool.

More information about Ideal Jacobs Corporation BT08x08-3PK #ad


Similar products