#ad
#ad
Oetiker OET080 x 25 #ad - The nipple, and then measure the outer diameter of the hose. 14100396 how to remove ear clamps can be easily removed using Oetiker’s hand clamp cutter HCC. 14100386 oetiker hip compound Action Side Jaw Pincer, Item No. Narrow band, concentrated seal compression. 14100387 oetiker hip single action Standard Jaw Pincer, Item No.

Clamp diameter the following applies as a guideline: To determine the correct clamp diameter, push the hose onto the attaching material, e. G. The hip tools have been designed especially for pinching ear clamps quickly and easily. The sizing references for PEX clamps are not the same as standard Oetiker clamps.

Oetiker 16700002 Stepless Ear Clamp, One Ear 5 mm Band Width, Clamp ID Range 6.8 mm Closed - 8 mm Open Pack of 25 #ad - 360° stepless design - no steps or gaps on inner circumference. How to install these clamps can be easily installed using Oetiker Hand Installation Pincers HIP. Genuine oetiker Clamps Stainless Steel, Material no. The ear clamp’s special design eliminates steps and/or overlaps on the inner circumference of the clamp for a 360° leak-free seal.

Oetiker hand Clamp Cutter, Item No. The value of the outer diameter must be slightly above the average value of the diameter range of the clamp to be selected. Specially formed strip edges reduce the risk of damage to the part being clamped.

More information about Oetiker OET080 x 25 #ad

7 mm Open Pack of 25 - Oetiker 16700001 Stepless Ear Clamp, One Ear 5 mm Band Width, Clamp ID Range 5.8 mm Closed

#ad
#ad
Oetiker OET070 x 25 #ad - The nipple, and then measure the outer diameter of the hose. 14100407 please note: the clamps included in this kit are not designed or intended for use in PEX applications. Mechanical interlock The interlock is a mechanical system for joining the clamp ends to permit closure. Some interlock designs can be opened for radial installation prior to closure.

Oetiker hand Clamp Cutter, Item No. The ear clamp’s special design eliminates steps and/or overlaps on the inner circumference of the clamp for a 360° leak-free seal. 14100387 oetiker hip single action Standard Jaw Pincer, Item No. Genuine oetiker clamps. The hcc tool is designed to safely remove ear clamps.

The sizing references for PEX clamps are not the same as standard Oetiker clamps. 360° stepless design - no steps or gaps on inner circumference. Specially formed strip edges reduce the risk of damage to the part being clamped. How to install these clamps can be easily installed using Oetiker Hand Installation Pincers HIP.

7 mm Open Pack of 25 - Oetiker 16700001 Stepless Ear Clamp, One Ear 5 mm Band Width, Clamp ID Range 5.8 mm Closed #ad - Because the tongue resides in a groove, the “tongue-in-groove” feature exerts pressure on the assembled parts over 360°, enabling the clamp to apply a continuous radial force completely around the connection’s diameter. The hip tools have been designed especially for pinching ear clamps quickly and easily.

Oetiker pex clamps should be used for PEX applications.

More information about Oetiker OET070 x 25 #ad


Similar products



Oetiker 16700004 Stepless Ear Clamp, One Ear 5 mm Band Width, Clamp ID Range 7.8 mm Closed - 9.5 mm Open Pack of 25

#ad
#ad
Oetiker OET095 x 25 #ad - The listed size of the clamp denotes the inner diameter id of the clamp. Please note - the size of the clamp denotes the inner dimension id of the clamp. The hcc tool is designed to safely remove ear clamps. 14100396 how to remove ear clamps can be easily removed using Oetiker’s hand clamp cutter HCC. Oetiker hip compound Action, Standard Jaw Pincer, Item No.

The value of the outer diameter must be slightly above the average value of the diameter range of the clamp to be selected. Oetiker pex clamps should be used for PEX applications. 14100407 please note: the clamps included in this kit are not designed or intended for use in PEX applications. Specially formed strip edges reduce the risk of damage to the part being clamped.

Oetiker 16700004 Stepless Ear Clamp, One Ear 5 mm Band Width, Clamp ID Range 7.8 mm Closed - 9.5 mm Open Pack of 25 #ad - 360° stepless design - no steps or gaps on inner circumference. 14100387 oetiker hip single action Standard Jaw Pincer, Item No. The ear clamp’s special design eliminates steps and/or overlaps on the inner circumference of the clamp for a 360° leak-free seal. Genuine oetiker clamps. Oetiker hand Clamp Cutter, Item No.

The hip tools have been designed especially for pinching ear clamps quickly and easily. Mechanical interlock The interlock is a mechanical system for joining the clamp ends to permit closure.

More information about Oetiker OET095 x 25 #ad


Similar products



13.3 mm Open Pack of 25 - Oetiker 16700010 Stepless Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 10.8 mm Closed

#ad
#ad
Oetiker OET133 x 25 #ad - Genuine oetiker clamps. Specially formed strip edges reduce the risk of damage to the part being clamped. 360° stepless design - no steps or gaps on inner circumference. 1. 4301/uns s30400 what is stepless technology? Oetiker invented the StepLess ear clamp in 1979. Genuine oetiker Clamps Stainless Steel, Material no.

360° stepless design - no steps or gaps on inner circumference. Please note - the size of the clamp denotes the inner dimension id of the clamp. Specially formed strip edges reduce the risk of damage to the part being clamped. Genuine oetiker clamps. Please note - the size of the clamp denotes the inner dimension id of the clamp.

13.3 mm Open Pack of 25 - Oetiker 16700010 Stepless Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 10.8 mm Closed #ad - 14100386 oetiker hip compound Action Side Jaw Pincer, Item No. Oetiker pex clamps should be used for PEX applications. 14100396 how to remove ear clamps can be easily removed using Oetiker’s hand clamp cutter HCC. Narrow band, concentrated seal compression. Some interlock designs can be opened for radial installation prior to closure.

. Mechanical interlock The interlock is a mechanical system for joining the clamp ends to permit closure.

More information about Oetiker OET133 x 25 #ad


Similar products



Oetiker 16700007 Stepless Ear Clamp, One Ear 5 mm Band Width, Clamp ID Range 9.6 mm Closed - 11.3 mm Open Pack of 25

#ad
#ad
Oetiker OET113 x 25 #ad - The listed size of the clamp denotes the inner diameter id of the clamp. Specially formed strip edges reduce the risk of damage to the part being clamped. Genuine oetiker Clamps Stainless Steel, Material no. Narrow band, concentrated seal compression. How to install these clamps can be easily installed using Oetiker Hand Installation Pincers HIP.

The ear clamp’s special design eliminates steps and/or overlaps on the inner circumference of the clamp for a 360° leak-free seal. Specially formed strip edges reduce the risk of damage to the part being clamped. 14100407 please note: the clamps included in this kit are not designed or intended for use in PEX applications.

Oetiker 16700007 Stepless Ear Clamp, One Ear 5 mm Band Width, Clamp ID Range 9.6 mm Closed - 11.3 mm Open Pack of 25 #ad - Specially formed strip edges reduce the risk of damage to the part being clamped. Please note - the size of the clamp denotes the inner dimension id of the clamp. 14100396 how to remove ear clamps can be easily removed using Oetiker’s hand clamp cutter HCC. Oetiker hand Clamp Cutter, Item No. 360° stepless design - no steps or gaps on inner circumference.

Oetiker hip compound Action, Standard Jaw Pincer, Item No. Clamp diameter the following applies as a guideline: To determine the correct clamp diameter, push the hose onto the attaching material, e. G.

More information about Oetiker OET113 x 25 #ad


Similar products



Oetiker 16700003 Stepless Ear Clamp, One Ear 5 mm Band Width, Clamp ID Range 7 mm Closed - 8.7 mm Open Pack of 25

#ad
#ad
Oetiker OET087 x 25 #ad - Please note - the size of the clamp denotes the inner dimension id of the clamp. The value of the outer diameter must be slightly above the average value of the diameter range of the clamp to be selected. 14100407 please note: the clamps included in this kit are not designed or intended for use in PEX applications.

Narrow band, concentrated seal compression. 360° stepless design - no steps or gaps on inner circumference. Because the tongue resides in a groove, the “tongue-in-groove” feature exerts pressure on the assembled parts over 360°, enabling the clamp to apply a continuous radial force completely around the connection’s diameter.

Oetiker 16700003 Stepless Ear Clamp, One Ear 5 mm Band Width, Clamp ID Range 7 mm Closed - 8.7 mm Open Pack of 25 #ad - Please note - the size of the clamp denotes the inner dimension id of the clamp. Specially formed strip edges reduce the risk of damage to the part being clamped. Oetiker pex clamps should be used for PEX applications. The hip tools have been designed especially for pinching ear clamps quickly and easily. The ear clamp’s special design eliminates steps and/or overlaps on the inner circumference of the clamp for a 360° leak-free seal.

360° stepless design - no steps or gaps on inner circumference. Please note - the size of the clamp denotes the inner dimension id of the clamp. Genuine oetiker Clamps Stainless Steel, Material no.

More information about Oetiker OET087 x 25 #ad


Similar products



Oetiker HIP 2000 387 Compound Action Side Jaw Pincer

#ad
#ad
Oetiker 14100387 #ad - Narrow band, concentrated seal compression. Specially formed strip edges reduce the risk of damage to the part being clamped. 360° stepless design - no steps or gaps on inner circumference. Please note - the size of the clamp denotes the inner dimension id of the clamp. 360° stepless design - no steps or gaps on inner circumference.

Narrow band, concentrated seal compression. Easier to close. Requires less hand force. Narrow band, concentrated seal compression. Top sealing performance. Specially formed strip edges reduce the risk of damage to the part being clamped. Recommended for the installation of Oetiker ear clamps. Hand installation pincers HIP are recommended for the installation of Oetiker ear clamps.

Oetiker HIP 2000 387 Compound Action Side Jaw Pincer #ad - The hip 2000 387 pincer is a compound action tool. Please note - the size of the clamp denotes the inner dimension id of the clamp. Genuine oetiker clamps. Specially formed strip edges reduce the risk of damage to the part being clamped. Made in the USA. 360° stepless design - no steps or gaps on inner circumference.

More information about Oetiker 14100387 #ad


Similar products



14.5 mm Open Pack of 50 - Oetiker 16700013 Stepless Ear Clamp, One Ear, Clamp ID Range 12 mm Closed

#ad
#ad
Oetiker OET145 x 50 #ad - 360° stepless design - no steps or gaps on inner circumference. Genuine oetiker clamps. Because the tongue resides in a groove, the “tongue-in-groove” feature exerts pressure on the assembled parts over 360°, enabling the clamp to apply a continuous radial force completely around the connection’s diameter.

The nipple, and then measure the outer diameter of the hose. The hip tools have been designed especially for pinching ear clamps quickly and easily. Made in the USA. 14100387 oetiker hip single action Standard Jaw Pincer, Item No. Genuine oetiker clamps. Genuine oetiker clamps. Narrow band, concentrated seal compression.

14.5 mm Open Pack of 50 - Oetiker 16700013 Stepless Ear Clamp, One Ear, Clamp ID Range 12 mm Closed #ad - Narrow band, concentrated seal compression. Narrow band, concentrated seal compression. Please note - the size of the clamp denotes the inner dimension id of the clamp. Oetiker hand Clamp Cutter, Item No. The sizing references for PEX clamps are not the same as standard Oetiker clamps. 14100386 oetiker hip compound Action Side Jaw Pincer, Item No.

360° stepless design - no steps or gaps on inner circumference.

More information about Oetiker OET145 x 50 #ad


Similar products



Knipex Tools 10 99 i220 8.75" Ear Clamp Pliers

#ad
#ad
Knipex Tools LP 10 99 i220 #ad - Narrow band, concentrated seal compression. Genuine oetiker clamps. An additional side jaw for easy clamping at Degree angle to ear clamp when space is limited. Genuine oetiker clamps. 360° stepless design - no steps or gaps on inner circumference. Specially formed strip edges reduce the risk of damage to the part being clamped.

Genuine oetiker clamps. Please note - the size of the clamp denotes the inner dimension id of the clamp. 360° stepless design - no steps or gaps on inner circumference. Recommended for the installation of Oetiker ear clamps. Specially formed strip edges reduce the risk of damage to the part being clamped. Narrow band, concentrated seal compression.

Knipex Tools 10 99 i220 8.75" Ear Clamp Pliers #ad - Specially formed strip edges reduce the risk of damage to the part being clamped. Easier to close. Please note - the size of the clamp denotes the inner dimension id of the clamp. Suitable for simple and reliable clamping of 1-ear and 2-ear clamps. Genuine oetiker clamps. Specially formed strip edges reduce the risk of damage to the part being clamped.

Requires less hand force.

More information about Knipex Tools LP 10 99 i220 #ad


Similar products



Oetiker 16700017 Stepless Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 14.5 mm Closed - 17 mm Open Pack of 25

#ad
#ad
Oetiker OET170 x 25 #ad - Oetiker pex clamps should be used for PEX applications. 360° stepless design - no steps or gaps on inner circumference. How to install these clamps can be easily installed using Oetiker Hand Installation Pincers HIP. Please note - the size of the clamp denotes the inner dimension id of the clamp. 14100407 please note: the clamps included in this kit are not designed or intended for use in PEX applications.

Some interlock designs can be opened for radial installation prior to closure. Narrow band, concentrated seal compression. Narrow band, concentrated seal compression. Please note - the size of the clamp denotes the inner dimension id of the clamp. 360° stepless design - no steps or gaps on inner circumference.

Oetiker 16700017 Stepless Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 14.5 mm Closed - 17 mm Open Pack of 25 #ad - Narrow band, concentrated seal compression. Requires less hand force. Specially formed strip edges reduce the risk of damage to the part being clamped. Please note - the size of the clamp denotes the inner dimension id of the clamp. Specially formed strip edges reduce the risk of damage to the part being clamped.

Genuine oetiker clamps. The hip tools have been designed especially for pinching ear clamps quickly and easily.

More information about Oetiker OET170 x 25 #ad


Similar products



ATP Vinyl-Flex PVC Food Grade Plastic Tubing, Clear, 3/16" ID x 5/16" OD, 100 feet Length

#ad
#ad
Advanced Technology Products (ATP) PVC316-516ANA #ad - Narrow band, concentrated seal compression. It is lightweight, flexible and economically priced. Atp vinyl-flex pvc nsf 61 tubing is suitable for general low-pressure industrial applications for the conveyance of liquids and semi solids. It also complies with fda regulations and is NSF 61 compliant for use in potable water and food and beverage applications.

Nsf 61 compliant for use in potable water and food and beverage applications. 360° stepless design - no steps or gaps on inner circumference. Suitable for simple and reliable clamping of 1-ear and 2-ear Clamps without damaging the press points. 360° stepless design - no steps or gaps on inner circumference.

ATP Vinyl-Flex PVC Food Grade Plastic Tubing, Clear, 3/16" ID x 5/16" OD, 100 feet Length #ad - Applications: beverage dispensing, low pressure air, potable water, drain, laboratory, distilled water transfer and light vacuum. Narrow band, concentrated seal compression. 360° stepless design - no steps or gaps on inner circumference. For clamps on cv boots, coolant and fuel lines, air pressure systems, compressors.

Durable and strong for long life. Specially formed strip edges reduce the risk of damage to the part being clamped. Recommended for the installation of Oetiker ear clamps.

More information about Advanced Technology Products (ATP) PVC316-516ANA #ad


Similar products