#ad
#ad
Orbit Underground/Sunmate 10107L #ad - 4 year warranty. High-quality brass construction. The brass nozzle plug is used in place of a mist nozzle on all outdoor mist cooling systems. Helps maintain your outdoor mist cooling system by replacing nozzles with plugs to keep mist line free of debris during the off season. For outdoor use with cold water only.

They are also useful to plug off openings when less mist is desired. Nozzle plugs prevent debris and insects from entering the mist line and clogging the system. These plugs are used to replace nozzles in the off season when the mist system is not used and the mist nozzles are being stored. Use with outdoor mist cooling systems.

More information about Orbit Underground/Sunmate 10107L #ad

Orbit Arizona Outdoor Misting System 4-Inch Nozzle Extension 5-Pack 10056H

#ad
#ad
Orbit 10056H #ad - 5 pack size: 4" flexible mist nozzle extension 10/24 nozzle thread that can be used place of a standard mist nozzle extends the mist spray another 4" the mist line, wire memory allows the user to direct the mist wherever needed Useful on fixed fitting mist systems such the diy pvc mist system Brass & stainless steel mist that only uses 1/2 gallon per hour per nozzle Allows for directional adjustment of the mist on a rigid mist line Can be used to extend the misting nozzle around obstacles Interchangeable - screw into any 10/24 threaded mist nozzle opening Not for use on pressure boosted systems 160 PSI or above.

Orbit Arizona Outdoor Misting System 4-Inch Nozzle Extension 5-Pack 10056H #ad - Can be used to extend the misting nozzle around obstacles. The mist line, and second, the wire memory allows the user to direct the mist wherever needed. Allows for directional adjustment of the mist on a rigid mist line. This is especially useful on fixed fitting mist systems such the DIY PVC mist system. The extension features a brass and Stainless Steel Mist that only uses one half gallon per hour per nozzle, making it the most water efficient nozzle available.

The 4" flexible mist nozzle extension has a 10/24 Nozzle Thread that can be used place of a standard Mist Nozzle. There are two features that make the 4" Extension so beneficial; first, it extends the mist spray another four in. Interchangeable - Screw into any 10/24 threaded mist nozzle opening.

More information about Orbit 10056H #ad


Similar products



Orbit 10106 Brass and Stainless Steel Mist Nozzle, 5-Pack

#ad
#ad
Orbit 10106H #ad - High-quality brass & stainless steel construction. Minimal water use of 1/2 gph per nozzle. The orbit 10106 brass and stainless Steel Mist Nozzle is the most water conservative and efficient mist nozzle available today. It only uses one half gallon per hour per nozzle and features sturdy brass and stainless steel construction.

For outdoor use with cold water only. Interchangeable - Screw into any 10/24 threaded mist nozzle opening. Allows for directional adjustment of the mist on a rigid mist line. Screw into any 10/24-threaded mist nozzle opening. 012 medium fine orifice. Can be used to extend the misting nozzle around obstacles.

More information about Orbit 10106H #ad


Similar products



Aootech Brass Misting Nozzles for Outdoor Cooling System 22 pcs,0.012" Orifice 0.3 mm 10/24 UNC

#ad
#ad
Aootech #ad - For outdoor use with cold water only. Nozzle can fully spray use the pressure of tap water. Please make sure that there is no debris in the water when you use it. Included in the package: 22 x brass Misting Nozzles Allows for directional adjustment of the mist on a rigid mist line. It will be better if filtering device can be installed at the water inlet pipe.

A filter on your mist system is highly recommended. Leak-proof, self-sealing o-ring included with each nozzle; no tape or sealant is required. Minimal water use of 1/2 gph per nozzle. From the manufacturer this misting nozzle does not need to use air compressed, excellent misting effect, energy and water saving, low cost, good effect, can use liquid pressure to form a very fine mist, no leakage.

Aootech Brass Misting Nozzles for Outdoor Cooling System 22 pcs,0.012" Orifice 0.3 mm 10/24 UNC #ad - Plugged up Nozzles are not covered by any warranty. Can be used to extend the misting nozzle around obstacles. Interchangeable - Screw into any 10/24 threaded mist nozzle opening. 012 medium fine orifice. The built-in stainless steel wafer through advanced forging process, strong durability, is 2. 5 times the life of similar nozzle.

High-quality brass & stainless steel construction.

More information about Aootech #ad


Similar products



Orbit Arizona Mist 10115H 3/8-Inch Misting Brass Auto Drain Valve

#ad
#ad
Orbit Underground/Sunmate 10115H #ad - When installed at low points in the mist line, it works with gravity and allows water to automatically drain from the line; this reduces nozzle clogging and prolongs the life of your mist system. It operates as a siphon by drawing the water out of the system once it is no longer pressurized. Best choice for Outdoor Use With Cold Water.

Screw into any 10/24-Threaded Mist Nozzle Opening. Operation pressure:20-70kg/Cm. Interchangeable - Screw into any 10/24 threaded mist nozzle opening. For outdoor use with cold water only. The mist auto drain valve is an essential component for any outdoor mist cooling system. High cost performance:20pcs+2pcsExtra Bonus=22pcs.

Orbit Arizona Mist 10115H 3/8-Inch Misting Brass Auto Drain Valve #ad - High quality: made of brass, never Rust. 012 medium fine orifice. Can be used to extend the misting nozzle around obstacles. It is designed for installation in one of two ways: either thread it into a 10/24 female-threaded nozzle opening or insert it into any professional slip-lock fitting. Versatile installation: install in any fitting with a 10/24 female-threaded opening or at the end of any orbit slip-lok.

High-quality brass construction. Easy to install.

More information about Orbit Underground/Sunmate 10115H #ad


Similar products



Aootech 32 Pack Brass Misting Nozzles for Outdoor Cooling System, 0.012” Orifice 0.3 mm 10/24 UNC

#ad
#ad
Aootech Aootech-6-5 #ad - It is used a sturdy brass body with stainless steel orifice, cool down, landscaping, widely used in dust removal, artificial fog and other humidification place. Leak-proof, self-sealing o-ring included with each nozzle; no tape or sealant is required. Best choice for Outdoor Use With Cold Water. Screw into any 10/24-Threaded Mist Nozzle Opening.

Operation pressure:20-70kg/Cm. High-quality brass construction. A filter on your mist system is highly recommended. Please make sure that there is no debris in the water when you use it. High cost performance:20pcs+2pcsExtra Bonus=22pcs. High quality: made of brass, never Rust. Best choice for Outdoor Use With Cold Water.

Aootech 32 Pack Brass Misting Nozzles for Outdoor Cooling System, 0.012” Orifice 0.3 mm 10/24 UNC #ad - Screw into any 10/24-Threaded Mist Nozzle Opening. Operation pressure:4-70kg/cm 60-995 psi flow Rate:80-145l/Min 21-38GPM. Minimal water use of 1/2 GPH Per Nozzle. High-quality brass & stainless steel construction. 32pcs brass misting nozzles for Outdoor Cooling System, Greenhouse, Landscaping and Dust Control.

High quality: made of brass, never Rust.

More information about Aootech Aootech-6-5 #ad


Similar products



Orbit Arizona Mist 10103 Misting Nozzle Cleaner, 8-Ounce

#ad
#ad
Orbit Underground/Sunmate 10103 #ad - Flow rate:80-145ml/Min. Minimal water use of 1/2 gallon Of Water Per Hour Per Nozzle. Prevents premature mist nozzle clgging and prolongs the life of your misting system. High-quality brass construction. Can be used to extend the misting nozzle around obstacles. Safe, biodegradable, and non-toxic. Versatile installation: install in any fitting with a 10/24 female-threaded opening or at the end of any orbit slip-lok.

Orbit Arizona Mist 10103 Misting Nozzle Cleaner, 8-Ounce #ad - Easy to install. Minimal water use of 1/2 gph per nozzle. Best choice for Outdoor Use With Cold Water. Screw into any 10/24-Threaded Mist Nozzle Opening. Operation pressure:20-70kg/Cm. 012 medium fine orifice. For outdoor use only. 4 year warranty. High cost performance:20pcs+2pcsExtra Bonus=22pcs. High quality: made of brass, never Rust.

Interchangeable - Screw into any 10/24 threaded mist nozzle opening. The orbit/arizona mist 8-ounce misting nozzle cleaner is formulated for use with all orbit/Arizona mist products.

More information about Orbit Underground/Sunmate 10103 #ad


Similar products



2 Pack 10 Misters | Brass and Stainless Steel Outdoor Misting | Cool Your Patio with a Fine Water Mist Nozzle - Orbit Mister Nozzles

#ad
#ad
Orbit #ad - Interchangeable - Screw into any 10/24 threaded mist nozzle opening. 4 year warranty. Easy to install. High-quality brass & stainless steel construction. Routine use for nozzle maintenance extends nozzle life. Can be used to extend the misting nozzle around obstacles. High cost performance:20pcs+2pcsExtra Bonus=22pcs.

High quality: made of brass, never Rust. Screw into any 10/24-threaded mist nozzle opening. For outdoor use only. 32pcs brass misting nozzles for Outdoor Cooling System, Greenhouse, Landscaping and Dust Control. High quality: made of brass, never Rust. Allows for directional adjustment of the mist on a rigid mist line.

2 Pack 10 Misters | Brass and Stainless Steel Outdoor Misting | Cool Your Patio with a Fine Water Mist Nozzle - Orbit Mister Nozzles #ad - The nozzle requires simple maintenance; just soak occasionally in misting nozzle cleaner to remove mineral deposits that may accumulate with use. Flow rate:80-145ml/Min. Minimal water use of 1/2 gallon Of Water Per Hour Per Nozzle. Prevents premature mist nozzle clgging and prolongs the life of your misting system.

Best choice for Outdoor Use With Cold Water. Screw into any 10/24-Threaded Mist Nozzle Opening.

More information about Orbit #ad


Similar products



Orbit Arizona Mist 92228 3/8-Inch Flex Mist Tubing, 20-Feet

#ad
#ad
Orbit Underground/Sunmate 92228 #ad - For outdoor use with cold water only. Treated with uv inhibitor. High-quality brass construction. Routine use for nozzle maintenance extends nozzle life. Tubing mist system. Color coordinated with 3/8-inch flexible tubing kits and accessories. Use with brass slip-lok fittings. For outdoor use only. 32pcs brass misting nozzles for Outdoor Cooling System, Greenhouse, Landscaping and Dust Control.

High quality: made of brass, never Rust. 4 year warranty. Safe, biodegradable, and non-toxic. 4 year warranty. Can be used to extend the misting nozzle around obstacles. Use to repair, replace, or customize any 3/8-inch. High cost performance:20pcs+2pcsExtra Bonus=22pcs. High quality: made of brass, never Rust. The 3/8-inch by 20-feet tan mist flexible ldpe tubing is ideal for water supply lines and can be cut to exact lengths for a customized mist system.

Orbit Arizona Mist 92228 3/8-Inch Flex Mist Tubing, 20-Feet #ad - . Versatile installation: install in any fitting with a 10/24 female-threaded opening or at the end of any orbit slip-lok. Easy to install.

More information about Orbit Underground/Sunmate 92228 #ad


Similar products