Reprapguru diy reprap prusa i3 v2 black 3d printer kit With Molded Plastic Parts USA Company Usa customer Tech Support. No soldering, cutting or drilling borosilicate heat bed glass & 2004 LCD included Impressive 8"x8"x7" build area Can run 110v or 220v comes with 110v US cord.

3D Print Removal Tool

Tilting or twisting the blade slightly will help speed up the lifting of the print. Rounded edge is safer and less likely to tear print bed tape. Speeds removal of parts from print bed. Useful to pop prints off the bed, and to scrape off stuck-on plastic. An essential addition to your 3D Printer Tool Kit. This brings the thicker part of the blade closest to the handle under the object and acts as a wedge to help pry the part up.

A great tool to go with your 3d printer -- the long, flexible blade is rounded, making it safer for kids, effective with large printed items, and minimizes damage to the printing surface. The thin blade is a convenient feeler gauge for setting a consistent gap between the nozzle and print bed. When tilting the blade, twist the handle counter-clockwise if you're working from the right side of the print.

See product's website for more usage information. Wiggle the blade loose and repeat. If you have been tramming leveling your heated print bed with a piece of paper, your fingers will thank you! The thicker neck is useful for removing rafts and for trimming off supports. Next, use a sawing motion to get the tool under the rest of the print to separate it from the bed.

If the print is stuck too firmly to remove with the tool, you may need to slightly increase your starting nozzle elevation. If the print is firmly stuck to the print bed, try pushing the tool so that the handle is closer to the print.


Similar products

HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Black
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, White
3D Printer Nozzle Cleaning Kit - 0.4mm Needles and Tweezers Toolkit - Stainless Steel Nozzle Cleaning Tool Kit - Alternative for 0.4mm Drill Bits for 3D Printer - Set of 11
FlashForge Finder 3D Printers with Cloud, Wi-Fi, USB cable and Flash drive connectivity
AmazonBasics PLA 3D Printer Filament, 1.75mm, 5 Assorted Colors, 1 kg per Spool, 5 Spools
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Blue
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Red
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Orange
Platform Sticker for QIDI TECH X-ONE2 /XONE 3D Printer: 5 pcs kit
REPRAPGURU DIY RepRap Prusa I3 V2 Black 3D Printer Kit With Molded Plastic Parts USA Company


HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Black

1. 75mm filament diameter Dimensional Accuracy +/- 003mm. The filaments are universally designed and compatible with 3D Printers using 1. 75mm diameter filament, with a dimensional accuracy of +/- 003mm. Pla, or polylactic acid, is a commonly used thermoplastic material that does not require the use of a heated print bed.

120 mm / 4. 5 inch long flexible blade helps to reach underneath large prints. Recommended extrusion/nozzle temperature 180°C - 210°C 356°F - 410°F. Because of the lower melting temperatures and lack of warping, PLA filaments retain their color vibrancy and are a common choice for displays or small household prints.

The 3d printed object will have a glossy type finish with we love it: Less warping Easy to use No heated bed required. Welcome to hatchbox 3d products our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality.

Rounded edge is safer and less likely to tear print bed tape. Speeds removal of parts from print bed. Useful to pop prints off the bed, and to scrape off stuck-on plastic. An essential addition to your 3D Printer Tool Kit. 1 kg approximately 2.


Similar products

HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, White
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Blue
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Red
Comgrow Creality Ender 3 3D Printer Aluminum DIY with Resume Print 220x220x250mm
Comgrow Creality Ender 3 Pro 3D Printer with Upgrade Cmagnet Build Surface Plate and UL Certified Power Supply 8.6" x 8.6" x 9.8"
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Yellow
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Orange
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Gray
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Silver
Official Creality 3D Printer Ender 3 Pro DIY Printer with Removable Magnetic Bed 220x220x250MM


HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, White

Recommended extrusion/nozzle temperature 180°C - 210°C 356°F - 410°F. Pla polylactic acid 3d Printer Filament Vacuumed Sealed With Desiccant. 1. 75mm filament diameter Dimensional Accuracy +/- 003mm. Pla polylactic acid 3d Printer Filament Vacuumed Sealed With Desiccant. 1. 75mm filament diameter Dimensional Accuracy +/- 0

03mm. Spool diameter: 7. 88" - spool width: 2. 69" - spool hub Hole Diameter: 2. 20". 3d printer filament 120 mm / 4. 5 inch long flexible blade helps to reach underneath large prints. Spool diameter: 7. 88" - spool width: 2. 69" - spool hub Hole Diameter: 2. 20". Rounded edge is safer and less likely to tear print bed tape.

Speeds removal of parts from print bed. Useful to pop prints off the bed, and to scrape off stuck-on plastic. An essential addition to your 3D Printer Tool Kit.


Similar products

HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Black
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Blue
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Red
Comgrow Creality Ender 3 Pro 3D Printer with Upgrade Cmagnet Build Surface Plate and UL Certified Power Supply 8.6" x 8.6" x 9.8"
Comgrow Creality Ender 3 3D Printer Aluminum DIY with Resume Print 220x220x250mm
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Gray
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Yellow
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Orange
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Silver
Monoprice Select Mini 3D Printer V2 - Black With Heated (120 x 120 x 120 mm) Build Plate, Fully Assembled + Free Sample PLA Filament And MicroSD Card Preloaded With Printable 3D Models


ELEGOO Stepstick Stepper Motor Driver Module A4988 + Heat Sink for 3D Printer Reprap, CNC Machine or RoboticsPack of 5

No phase sequence tables, high frequency control lines, or complex interfaces to programming. 1 kg approximately 2. 20 lbs spool; Eco-Friendly, Odorless. A4988 interface is very suitable for complex microprocessor is unavailable or is overburdened. Feature: a4988 is a complete microstepping motor driver with built-in translator for easy operation.

The converter is the key to the easy implementation of the A4988. Recommended extrusion/nozzle temperature 180°C - 210°C 356°F - 410°F. Output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the regulator can slow or mixed decay mode. 120 mm / 4. 5 inch long flexible blade helps to reach underneath large prints.

Mixed-decay current control scheme results in reduced audible motor noise, increased step accuracy, and reduced power consumption. 1. 75mm filament diameter Dimensional Accuracy +/- 003mm. Pla polylactic acid 3d Printer Filament Vacuumed Sealed With Desiccant. Simple step and direction control interface, Take anti-static measures before you use the A4988 modules in case of short-circuit.




Similar products

KINGPRINT 12864 LCD Graphic Smart Display Controller Board with Adapter and Cable for 3D Printer Ramps 1.4 RepRap 3D Printer Mendel Prusa Arduino
HiLetgo RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board Support Arduino Mega 2560
HiLetgo® 2pcs V3 Engraver Shield 3D Printer CNC Expansion Board A4988 Driver Board for Arduino
STEPPERONLINE Stepper Motor Nema 17 Bipolar 40mm 64oz.in(45Ncm) 2A 4 Lead 3D Printer Hobby CNC
ELEGOO MEGA 2560 R3 Board ATmega2560 ATMEGA16U2 + USB Cable for Arduino Projects RoHS Compliant
WINOMO Nema 17 Stepper Motor Mounting Bracket w/ M3 Screws 2 Pack
Stepper Motor Nema 17, 5pcs Bipolar Nema 17 Stepper Motor 3.5V 1A 18.4oz.in(13Ncm) 4 Lead for 3D Printer/CNC
Stepper Motor Mounting Bracket, 3PCS Alloy Steel L Bracket for Nema 17 Stepper Motor with Screws and Inner Hexagon Spanner
TMC2208 V1.2 3D Printer Stepper Motor Driver Module, Eryone with Heat Sink Screwdriver for 3D Printer Mother Boards Reprap MKS Prusa and More (5pcs/Pack)
ELEGOO 5 Sets 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino


HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Blue

Pla polylactic acid 3d Printer Filament Vacuumed Sealed With Desiccant. The 3d printed object will have a glossy type finish with we love it: Less warping Easy to use No heated bed required. Rounded edge is safer and less likely to tear print bed tape. Speeds removal of parts from print bed. Useful to pop prints off the bed, and to scrape off stuck-on plastic.

An essential addition to your 3D Printer Tool Kit. 1 kg approximately 2. 20 lbs Spool. 1. 75mm filament diameter Dimensional Accuracy +/- 003mm. Spool diameter: 7. 88" - spool width: 2. 69" - spool hub Hole Diameter: 2. 20". Pla polylactic acid 3d Printer Filament Vacuumed Sealed With Desiccant. Simple step and direction control interface, Take anti-static measures before you use the A4988 modules in case of short-circuit.

Because of the lower melting temperatures and lack of warping, PLA filaments retain their color vibrancy and are a common choice for displays or small household prints. Intelligent chopping control that automatically selects the correct current decay mode fast decay or slow decay. Welcome to hatchbox 3d products our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality.




Similar products

HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Red
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Black
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Yellow
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, White
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Orange
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Green
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Gray
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Silver
Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament (Genuine Capricorn Premium Tubing)
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Gold


HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Green

Spool diameter: 7. 88" - spool width: 2. 69" - spool hub Hole Diameter: 2. 20". Recommended extrusion/nozzle temperature 180°C - 210°C 356°F - 410°F. Pla polylactic acid 3d Printer Filament Vacuumed Sealed With Desiccant. 1. 75mm filament diameter Dimensional Accuracy +/- 003mm. 1 kg approximately 2. 20 lbs Spool. Spool diameter: 7.

88" - spool width: 2. 69" - spool hub Hole Diameter: 2. 20". 1. 75mm filament diameter Dimensional Accuracy +/- 003mm. Simple step and direction control interface, Take anti-static measures before you use the A4988 modules in case of short-circuit. Output drive capacity of up to 35 V and ± 1. 2 a. Adjustable current control lets you set the maximum current output with a potentiometer.

1 kg approximately 2. 20 lbs Spool. Intelligent chopping control that automatically selects the correct current decay mode fast decay or slow decay.


Similar products

HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Red
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Blue
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Yellow
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Orange
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Black
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, White
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Gray
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Gold
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Silver
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Copper


HiLetgo RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board Support Arduino Mega 2560

Intelligent chopping control that automatically selects the correct current decay mode fast decay or slow decay. 3. Heater / mosfet outputs and three fan thermistor circuit. 8. I2c and spi pins left for future expansion. 12. Led indicate when the heater output. Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection.

9. Hooked into all MOSFET PWM pin versatility. 1 kg approximately 2. 20 lbs Spool. Spool diameter: 8" - spool width: 2. 50" - spool hub Hole Diameter: 1. 25". Spool diameter: 8" - spool width: 2. 50" - spool hub Hole Diameter: 1. 25". 6. Suitable for 5 Pololu stepper driver board. Features: 1. It has cartesian robots and regulations of the extruder.

Recommended extrusion/nozzle temperature 180°C - 210°C 356°F - 410°F.


Similar products

ELEGOO MEGA 2560 R3 Board ATmega2560 ATMEGA16U2 + USB Cable for Arduino Projects RoHS Compliant
BIQU A4988 Compatible Stepper StepStick Motor Diver Module with Heat Sink for 3D Printer Controller Ramps 1.4(Pack of 5pcs)
ELEGOO Stepstick Stepper Motor Driver Module A4988 + Heat Sink for 3D Printer Reprap, CNC Machine or Robotics(Pack of 5)
KINGPRINT 12864 LCD Graphic Smart Display Controller Board with Adapter and Cable for 3D Printer Ramps 1.4 RepRap 3D Printer Mendel Prusa Arduino
KINGPRINT DRV8825 Stepper Motor Driver Module with Heat Sink for 3D Printer Rrerap Ramps 1.4 A4988 (Pack of 5pcs)
Kuman 3D Printer Controller Kit for Arduino Mega 2560 Uno R3 Starter Kits +RAMPS 1.4 + 5pcs A4988 Stepper Motor Driver + LCD 12864 for Arduino Reprap K17
UEETEK 10pcs 3D Printer Stepper Motor Cable Lead Wire HX2.54 4 pin to 6 pin 1M
HiLetgo 5pcs DRV8825 Stepper Motor Driver Module for 3D Printer RepRap 4 RAMPS1.4 StepStick
Witbot DRV8825 Stepper Motor Driver Module 4-Layer with Mini Heat Sink for 3D Printer RP1.4 A4988(Pack of 5pcs)
KEYESTUDIO Mega 2560 Board for Arduino +USB Cable


Gulfcoast Robotics V2 Aluminum Y Carriage Plate Upgrade for Prusa i3 Style 3D Printer

Recommended extrusion/nozzle temperature 180°C - 210°C 356°F - 410°F. Pla polylactic acid 3d Printer Filament Vacuumed Sealed With Desiccant. Has 2 x additional provisioning holes for 3 point level adjustment of build surface. If you look for maker select carriage plate, here your product B07B251KBS. Output drive capacity of up to 35 V and ± 1.

2 a. Adjustable current control lets you set the maximum current output with a potentiometer. Recommended extrusion/nozzle temperature 180°C - 210°C 356°F - 410°F. Universal prusa i3 carriage V2 features: Brushed, anodized aluminum plate 3mm thick see drawing below for dimensions. Linear bearing mounting options: LM8UUs mounted with straps.

Has cutout similar to original Prusa i3 Y carriage design. Simple step and direction control interface, Take anti-static measures before you use the A4988 modules in case of short-circuit. Spool diameter: 8" - spool width: 2. 50" - spool hub Hole Diameter: 1. 25". Spool diameter: 7. 88" - spool width: 2.


Similar products

WINSINN Leveling Spring Component - M3 Screw Knob - for 3D Printer Hot Bed/Platform (Pack of 4set)
BQLZR SCS8UU Linear Motion Ball Bearing CNC Slide Bushing 34.5mm Length Pack Of 4
3D Printer Solid Polymer LM8UU Bearing 8mm shaft - Igus Drylin RJ4JP-01-08 for Anet A8 Prusa i3 3D Printer RepRap
HICTOP Linear Motion Ball Bearing CNC SCS8UU Slide Unit Bushing Linear Roller Bearing Slide Block (Pack of 4)
Anycubic 43188-247109 Ultra Base 3D Printer Platform with Aluminum 12V/24V Dual Power MK3 Heatbed, Tempered Glass Plate, Durable Build Surface for Prusa I3 220x220mm
10 Pieces Igus Drylin RJ4JP-01-08 Prusa i3 Mk2s Prusa i3 Mk3 Anet A8 Prusa i3 3D Printer RepRap LM8UU Bearing X-Y-Z Axis replacement
URBEST Inlet Module Plug 5A Fuse Switch Male Power Socket 10A 250V 3 Pin IEC320 C14
Mercurry 5 Meters GT2 timing belt width 6mm Fit for RepRap Mendel Rostock Prusa GT2-6mm Belt
BIQU Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
OctagonStar Flexible Couplings 5mm to 8mm NEMA 17 Shaft for RepRap 3D Printer or CNC Machine(2PCS)


Happisland 5pcs NTC 3950 100K Thermistor with 1 Meter Wiring and Female Pin Head for RepRap 3D Printer Heatbed or Hot End

1. 75mm filament diameter Dimensional Accuracy +/- 003mm. 1 kg approximately 2. 20 lbs Spool. Use it with heated bed or extruder. Spool diameter: 8" - spool width: 2. 50" - spool hub Hole Diameter: 1. 25". Spool diameter: 8" - spool width: 2. 50" - spool hub Hole Diameter: 1. 25". Output drive capacity of up to 35 V and ± 1.

2 a. Adjustable current control lets you set the maximum current output with a potentiometer. 1. 75mm filament diameter Dimensional Accuracy +/- 003mm. 1. 75mm filament diameter Dimensional Accuracy +/- 003mm. Spool diameter: 7. 88" - spool width: 2. 69" - spool hub Hole Diameter: 2. 20". Conviniently pre-wired with 1 meter long high temperature PTFE insulated wiring.

Made of stiff, tempered aluminum alloy, brushed and anodized. Package list: 5* ntc 3950 100k thermistor with female head 120 mm / 4.


Similar products

Signstek 10 PCS Reprap 12V 40W 620 Ceramic Cartridge Heater for 3D Printer Prusa Mendel
Signswise 5pcs Reprap 24V 40W Ceramic Cartridge Heater for 3D Printer Prusa Mendel
Ewigkeit 24V 40W Heater Cartridge 620 Ceramic Hotend for 3D Printer Prusa Mendel (Pack of 5pcs)
Heat High Temperature Resistant Adhesive Gold Tape for Electric Task 30m 12mm
BALITENSEN 24v 40w Ceramic Cartridge Heater 620 for 3d Printer Reprap Prusa Mendel Pack of 5
Genuine E3D V6 Socks Pro (Pack of 3) (V6-SOCK-PRO-3PACK)
WAHHING 10PCS 2mm thick Heater block cotton Safe Working Temp less 300°C For 3D printer Hotend
SoundOriginal 2pcs Cooling Blower Fan DC 12V 0.06A~0.15A 50mmx15mm Fans for 3D Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement
PTFE Teflon Bowden Tube for 1.75 Filament (2.0mm ID/4.0mm OD) – White Connector Tubing for 3D Printer - 2.0 Meters
NEC SF240E SEFUSE Cutoffs NEC Thermal Fuse 240C 240 Degree 10A 250V (pack of 5)


HATCHBOX ABS 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Black

The fifth stepper motor output port can be customized as a Z-axis motor or a second extruder. Can be extended to control other accessories. Three field effect transistors, three heater / fan output ports, three thermistor circuits. Heated bed control, extra 11A fuse. Pololu board foot socket, can be easily replaced or removed.

Carriage is compatible with typical Prusa i3 like 3D Printers. The filaments are universally designed and compatible with 3D Printers using 1. 75mm diameter filament, with a dimensional accuracy of +/- 003mm. Spool diameter: 8" - spool width: 2. 50" - spool hub Hole Diameter: 1. 25". Conviniently pre-wired with 1 meter long high temperature PTFE insulated wiring.

Recommended extrusion/nozzle temperature 180°C - 210°C 356°F - 410°F. If you look for maker select carriage plate, here your product B07B251KBS. 1 kg approximately 2. 20 lbs Spool. 1 kg approximately 2.


Similar products

HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Black
HATCHBOX ABS 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Silver
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, White
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Blue
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Red
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Gray
HATCHBOX PETG 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Orange
ABS Filament, 3D Hero ABS Filament 1.75mm,ABS 3D Printer Filament, Dimensional Accuracy +/- 0.02 mm, 2.2 LBS(1KG),1.75mm Filament,Black
Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament (Genuine Capricorn Premium Tubing)
AmazonBasics ABS 3D Printer Filament, 2.85mm, Black, 1 kg Spool