Top 10 Solar Charge Controller 50A – Renewable Energy Controllers

As an Amazon Associate I earn from qualifying purchases.

1. Aramox


12V/24V 30A/50A/70A Intelligent Solar Panel Contrller MPPT LCD Display Solar Charge Controller Solar Battery Regulator Dual USB Port30A

Aramox #ad - High efficiency intelligent MPPT 3-stage charging mode. For safe and correct installation: please check the specification below before use. Muti-use: the load control mode can be selected, the timer function can be reset for street light at night; discharge capacity control; discharge counter of ampere hour.

Solar panels, adopting negative MOSFET in series control circuit. Working storage function: solar panel battery regulator can record the total run time of system, record times of full charged battery, record timers of error during running time, you don't need to worry about lost the data. Reliable protection: reliable over voltage protection, short circuit protection, over load protection, overcharge protection, over-discharge protection, roundly reverse connected protection.

Humanized design: solar charge controller has humanized LCD displaying and double button operation of man-machine interface. Automatic function: automatic identification system voltage, solar charge controller positive poles are all connected together, battery, 12/24V auto recognition. Accurate temperature compensation, correcting the charging and discharging voltage automatically, improving the battery lifetime.
BrandAramox #ad
ManufacturerAramox #ad
Height1.57 Inches
Length6.89 Inches
Width5.51 Inches
Part NumberAramox9yic0uv7xe-01

2. PowMr


PWM 50A Solar Charge Controller,Intelligent USB Port Display 12V/24V Auto Charge Regulator

PowMr #ad - Three load working mode to meet your different need, Good Heat sinking design. Dual usb output 5v/2. 5a, with large-screen LCD display with power off memory. 50a solar charge controller with 12v/24V auto work. Easy to setting and connection. Do not use other batteries including lithium batteries, AGM, nickel-metal hydride batteries, etc. Open, gel lead acid batteries support. Build-in full protection and 3-stage charging to prolong your battery's life. Max input voltage 48V, max input power1300W.
BrandPowMr #ad
ManufacturerPowMr #ad

3. Victron Energy


Victron Energy SmartSolar MPPT 100V 50 amp 12/24-Volt Solar Charge Controller Bluetooth

Victron Energy #ad - It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. The smartsolar charge controller will even recharge a severely depleted battery.

Anytime anywhere remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect. Smartsolar mppt 100-volt 50 amp: a solar charger gathers energy from your solar panels, and stores it in your batteries, Using the latest, fastest technology, SmartSolar maximises this energy-harvest.

Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation. By constantly monitoring the voltage and current output of your solar PV panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage.
BrandVictron Energy #ad
ManufacturerVictron Energy #ad
Height2.76 Inches
Length5.12 Inches
Weight3.24 Pounds
Width7.48 Inches
Part NumberSCC110050210

4. Victron Energy


Victron Energy BlueSolar MPPT 100V 50 amp 12/24-Volt Solar Charge Controller

Victron Energy #ad - Victron energy bluesolar mppt 100-volt 50 amp Solar Charge Controller maintains battery health, extending its life. Remotely control and monitor the extensive features of your BlueSolar MPPT solar charge controller by attaching a Bluetooth dongle and pairing it with your smartphone or other device via VictronConnect.

Using the latest, BlueSolar maximises this energy-harvest. Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation. Mppt solar charge controller: by constantly monitoring the voltage and current output of your solar PV panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. A solar charger gathers energy from your solar panels, fastest technology, and stores it in your batteries.
BrandVictron Energy #ad
ManufacturerVictron Energy #ad
Height5.12 Inches
Length7.48 Inches
Weight2.2 Pounds
Width2.76 Inches
Part NumberSCC020050200



SUNYIMA 50A MPPT Solar Charge Controller with LCD Display Dual USB Multiple Load Control Modes,New Mppt Technical Maximum Charging Current 50A

SUNYIMA #ad - Multi-function lcd displaysthis controller is 12v/24v 12v/24v automatically adapt, first connect the battery, then connect the solar panels, make sure the battery has enough voltage, when you first use it, so that the controller can recognize the correct battery type.

Dual usb 50a mppt solar charge controller using innovative mppt technology high tracking efficiency up to 99%;Please refer to the information if you are not familiar with Mppt technology:There are many kinds of MPPT technology, Our Solar Controller Mppt technology is to detect the maximum charging current, not the boost type or the automatic charging of the solar panel voltage. Industrial-grade master chip16aD sampling accuracy, discharge current accurate real-time display, temperature Charging current, power generation at a glance.

Please attentionpls note the connection ways, Connect the battery first, then connect the solar panelYou can't reverse the order. The place that don't understand pls contact us, Thanks!. Reliable protectionovervoltage, overcharge, short circuit, high charging efficiency, Non-stop detection during charging, over discharge protection function;Automatic focusing MPPT tracking charging, overload, bidirectional focusing tracking.
BrandSUNYIMA #ad
ManufacturerSUNYIMA #ad

6. SolarEpic


EPEVER MPPT Solar Charge Controller 50A Negative Ground 150V PV Solar Panel Charger with MT50 Remote Meter Temperature Sensor & PC Communication Cable

SolarEpic #ad - Support 4 charging options: sealed, Gel, Flooded and User define, Battery temperature compensation will make the charging progress efficiently. Only solar panel and Battery Connector Available.

Negative ground 150v pv input, compatible with 12/24/36/48v batteries lead Acid Charging. 50ampere charging current max with big heat sink, 1875w/36v battery, max. Lithium battery :liFePO4/ LiNiCoMnO2. Standard modbus communication protocol with RS485 interface, to monitor or set the parameters by using the phone Apps, MT50 Meter and PC software. Dual rs485 port rj45 connector, it can be paralleled up to 8 units together linked by 8pin ethernet cable to make the data monitoring easy and accurate. Pv input power: 625w/12v battery, 1250w/24V battery, 2500W/48V battery system.
BrandSolarEpic #ad
ManufacturerEpsolar #ad
Part NumberTracer5415AN
Warranty3 Years Warranty

7. Suuonee


Solar Charge Controller, 60A/50A/40A/30A/20A/10A 12V 24V Auto Solar Charge Controller PWM Controller 50A

Suuonee #ad - Full 3-level PWM charge management. High performance: built-in short circuit protection, open circuit protection, reverse protection, overload protection. Service guarantee: if you have any question or any unsatisfactory about the product, you can contact our customer service at any time, our team will response you in 24 hours. High quality: built-in industrial microcontroller. Display: large LCD display with all adjustable parameters. Current protection: Dual mosfet reverse current protection, low heat.
BrandSuuonee #ad
ManufacturerSuuonee #ad
Height3.94 Inches
Length3.94 Inches
Weight0.22 Pounds
Width3.94 Inches
Part NumberSuuonee3bzca0ruke-05

8. ZHCSolar


50 Amp Solar Charge Controller 48V 36 Volt 24V 12V Auto Switch, 50A PWM Panel Voltage Regulator for Lithium ion Lead Acid Lifepo4 Battery

ZHCSolar #ad - Ultra-protection: our charge controller are designed to provide the most safety experience to the customer with Those Protection: Load overcurrent/short-circuit protection, Battery over discharge/overvoltage/low voltage protection, Solar panel/Battery reverse connect protection and Battery Reverse Discharge Protection.

Powerful 50 amp charge controller supports 48v 36v 24v 12V Battery System, Auto Identification & Switch, 3 Stage Power Gathering Technology maximizes the energy-harvest. Multiple battery type support: lithium ion, lifepo4 and Lead Acid Battery, The unique feature is capable to start and charge the lithium battery from zero volts. Features you’ll love: accumulated amper hours, general 24-hour working mode, Light Control Delay Mod, Light Control Mode, Various Load Mode and Working Mode, Light Control delay & Morning light Mode and Reverse-Light Control Mode.

It also has a charge current protection feature that Most Controllers in the Martket Do Not Have – order today to enjoy the Solar Power. Easy to use: lcd display with backlight function easy read in a dark place, Simple Button Operation, lcd display indicate Battery Power, Current and Charge & discharge Status, Daily Power Statistics, Voltage, Adjuatable Charging and Discharging Control Parameters – it’s really that simple.
BrandZHCSolar #ad
ManufacturerZHCSolar #ad

9. Temank


Temank EPEVER 50A MPPT Charge Controller 48V 36V 24V 12V Auto,50 amp Solar Controller MPPT Negative Ground Max 150V Input fit for Litium Sealed AGM Gel Flooded User BatteryUpgraded

Temank #ad - Battery temperature compensation function to ensure the controller’s life. Negative ground tracer an series mppt controller: 12v/24v/36V/48V Auto identifying system voltage.

Auto control system to limit the charging power & current go over the rated value. Max input current: 50 amp: max input solar power: 625w/12v 1250w/24v 1875w/36v 2500W/48V; Max input Voltage: 150V; Real-time energy recording and statistical. 50a mppt charge controller support for 4 type battery charging : Litium, Lead-acid Sealed, AGM, Gel, Flooded and User couldn’t set Lithium. Rs-485 communication bus interface and Modbus communication protocol, available to meet various communication requirements in different situations.
BrandTemank #ad
ManufacturerEPEVER #ad



EPEVER 50A MPPT Solar Charge Controller Tracer-an Series High-Power Charge Controllers Compatible with 12V/24V/36V/48V Lead-Acid and Lithium Batteries 50A

EPEVER #ad - Hundred percent full load operation in working environment temperature range within charging & discharging. Solar rv, household system and field monitoring etc. Advanced mppt technology & ultra-fast tracking speed, with tracking efficiency no less than 99.

5%; maximum dc/dc transfer efficiency is as high as 98. 6%, full load efficiency is up to 98%. With battery temperature compensation function, real-time energy recording and statistical function. Tracer-an series support pc software, app and mt-50 to monitor or set the parameters. Maximum input current: 50a. Automatically identifying 12/24/36/48v DC system voltage, Gel, compatible with various battery options: Sealed, Flooded and Lithium.

Maximum pv input power: 625w/12v; 1250w/24v; 1875w/36V; 2500W/48V. Common negative grounding. Maximum input voltageopen circuit voltage: 150V. The isolated rs485 interface with standard modbus communication protocol support up to 8 charging in parallel, so that can be widely used for various applications, e. G.
BrandEPEVER #ad
ManufacturerEPEVER #ad
Part NumberEPEVER