As an Amazon Associate I earn from qualifying purchases.
1. Renogy #ad
RENOGY 8ft. 10 AWG Wire Copper Tray Cable, Connect Charge Controller and Battery #adRenogy #ad
- High-purity oxygen-free Copper wiring for maximum conductivity. 3/8 inch round center hole. Contain a set of positive and negative cables to connect the charge controller to battery. Tin plating. Produce optimal power output even in high temperature conditions.
Tuv tested cable. Uv resistant and waterproof. The rating voltage is TUV 1000V. The temperature is from -40°F to +185°F. Tuv logo print per feet indicates that the cable meets TUV standards for PV solar application. Heat-shrink tubing insulates wires, provides abrasion resistance and electrical safety.
2. RICH SOLAR #ad
RICH SOLAR Tray Cable Connect Charge Controller and Battery 10AWG 10' #adRICH SOLAR #ad
- Tuv tested cable. Produce optimal power output even in high temperature conditions. Uv resistant and waterproof. Connects the charge controller to battery. Tuv logo print per feet indicates that the cable meets TUV standards for PV solar application.
3. Topsolar #ad
Topsolar Solar Panel Kit 20W 12V Monocrystalline with 10A Solar Charge Controller + Extension Cable with Battery Clips O-Ring Terminal for RV Marine Boat Off Grid System #adTopsolar #ad
- With the 10a solar charger controller, discharge and short circuit, reversed polarity protection, over voltage, it can prevent the battery from over charge, battery is fully protected. Built with strong tempered glass and aluminum frame, 25 years transferable output warranty and 1 years material and workmanship warranty.
Perfect for off grid 12 volt batteries charging system and a variety of DC applications, marine, designed for maintaining 12 volt batteries in car, cabins, RVs, battery operated gates, boats, back-up power and remote power use.
Solar panel kits, 12v/24v solar charger regulator controller and two 6.
5ft cable with alligator clips and O-ring terminal for battery charging connection, package included 20 watts solar panel, easy to fix and install. Small in size and light to take, it is easy to carry for camping or other outdoor activities. Easy to install with pre-drilled holes on the back of panels for fast mounting and securing.
4. Topsolar #ad
Topsolar Solar Panel Kit 10W 12V Monocrystalline with 10A Solar Charge Controller + Extension Cable with Battery Clips O-Ring Terminal for RV Marine Boat Off Grid System #adTopsolar #ad
- Lightweight and durable. Perfect for off grid 12 volt batteries charging system and a variety of DC applications, RVs, battery operated gates, boats, cabins, designed for maintaining 12 volt batteries in car, marine, back-up power and remote power use.
Solar panel kits, 12v/24v solar charger regulator controller and two 6. 5ft cable with alligator clips and O-ring terminal for battery charging connection, package included 10 watts solar panel, easy to fix and install.
With the 10a solar charger controller, it can prevent the battery from over charge, reversed polarity protection, over voltage, discharge and short circuit, battery is fully protected.
It is easy to carry and take with size 13. 19*8. 15*067 inch, weigh 2. 75lbs. High efficiency monocrystalline solar cells, heavy duty anodized aluminum frame, the corrosion-proof aluminum frame and tempered glass coating shield the panel from weathering and wear. Easy to install with pre-drilled holes on the back of panels for fast mounting and securing.
5. Topsolar #ad
Topsolar 20W 12V Solar Panel kit Battery Charger Maintainer + 10A PWM Solar Charge Controller + Adjustable Mount Tilt Rack Bracket + Solar Cable for Car RV Marine Boat 12 Volt Battery Off Grid #adTopsolar #ad
- It can safely charge and maintain various 12V batteries such as Wet, MF, Gel, EFB and AGM. It can generate current to charge the batteries, cabin, motorcycle, RVs, shed, gate opener, tractor, snowmobiles, boat, trucks, prevent the loss current of the battery in storage or standby process.
Package includes 20 watts 12 volt solar panel, two 6. 5ft cables with alligator clips and o-ring terminal for battery charging connection, U shape mount tilt rack bracket, 10A PWM solar charge controller, easy to fix and install.
The solar panel is lightweight, heavy duty anodized aluminum frame, made with high efficiency monocrystalline solar cells, easy to carry and install, the corrosion-proof aluminum frame and tempered glass coating shield the panel from weathering and wear.
The product is equipped with a bracket that adjusts the mounting angle for better sunlight reception, wood or wall. The 20 watt solar panel battery charger and maintainer, a basic off grid solar panel kit, ideal for a variety of DC applications. With an 10a pwm intelligent charge controller, full protections prevent battery from overcharge and over discharge, short circuit, over voltage, it can be mounted on ground, etc. It is also suitable for maintaining and charging the batteries in any car, etc.
6. ALLPOWERS #ad
ALLPOWERS 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator with USB Port Display 12V/24V #adALLPOWERS #ad
- Rated discharge current: 20a; usb output voltage: 5v/3a; battery voltage: 12v/24v auto. Mutiple electric protection: Over-current and short-circuit protection, inverse connection protection, low voltage and overcharge protection.
Adjustable power rate with dual usb ports; 3-StageBulk, ABS, Float charge management and 4-Stage PWM charge. Good heat dissipation: dual mosfet reverse current protection, it is better to shelter them for better heat dissipation, low heat productionALL electronic components generate heat when they are running, avoid direct sunlight exposure or damp place.
Please notice the controller might be power off if the battery voltage is too low.
Functionality: equipped with industrial-grade STM 8 microprocessor to control the charger and discharge process and it has reliable battery to charge and discharge period management. Easy to use: comes with a display that can clearly indicate the status and data, suitable for home, industrial, it can be conveniently switched modes and parameter configuration, commercial etc.
7. SUNER POWER #ad
20 Watts Solar Panel Built-in Intelligent MPPT Solar Charge Controller + Adjustable Mount Bracket + SAE Connection Cable Kits, SUNER POWER 12V Waterproof Solar Battery Trickle Charger & Maintainer #adSUNER POWER #ad
- The mounting bracket is easy to DIY, could be applied to mount on the ground or vertical wall. Free maintenance durable aluminum frame and tempered glass, well built for years. Come with 3 piece sAE cable kits, plug and play, easy to use. Smart 3-stages charging algorithm is improved to better charge and maintain 12v battery in all seasons.
Intelligent charge & maintain built-in intelligent mppt charge controller, generates at least 10%-20% more power than traditional controller. Visual monitor the colorful led indicator helps to visually monitor working status of the charging and better understand your battery’s conditions.
Charging will be cut off automatically when battery is fully charge, and resumed when battery goes flat, totally free maintenance.
Backed by extended 12 months warranty and lifetime technical supports. Adjustable mount bracket exclusively engineered structure to adjust the angle of solar panel, absorb as much as sunshine and generate more power. Full protections prevent the battery from over-charge, over-voltage, waterproof and spark-proof, and short circuit, reversed polarity protection, discharge, the battery is fully protected. No electricity cost, free maintenance for outdoor use.
8. Beleeb #ad
PV Limited Power Input,Built-in Operation Log and Temperature Compensation, Beleeb 15A 12V/24V MPPT Solar Charge Controller,75V Max Input #adBeleeb #ad
- 3-stage charging bulk, boost, fast and stable track the Maximum Power Point, Float, and Equalization and temperature compensation increase your battery life and improve your system's performance. Pv array limited power input function. Advanced mpptmaximum power point tracking technology, tracking accuracy 99.
5% maximizing the energy from solar panels to charge your system. In theory, to ensure that the controller does not overload operation under any conditions. Widely range of maximum power point of pv array, no matter how much power of solar panel input, the controller will limited the input power under rated power, Max PV input Voltage 75V.1
12v/24v automatic system voltage, 12v/200w and 24v/400w pv max input power PV array limited power input function, 15A Max charging current, Synchronous Rectifier Technology, Max 98% transfer efficiency of circuit.
Normal mode, fld built-in operation log, 3 types battery dataSEL, timer and sensor mode, account system working state and humanized LCD displaying, GEL, Sensor Mode, dynamic display operation data and working state.5 years warranty. Excellent digital protect function, overload, Overcharging, Reverse connection, Over-discharging, Overvoltage, short circuit, Also professional connector maximum degree avoid damage due to system fault or installation error.
9. Sunway Solar #ad
Sunway Solar 16FT Battery Charger Extension Cable Adapter SAE Connectors Quick Connect with Battery Clamps For 12V Trickle Charger And Maintainer,12Volt Solar Panel Battery Charger Power System Kit #adSunway Solar #ad
- The led charge indicator - it is used to determine if the battery charger and maintainer, solar charger, solar power kit is workinghas sufficient electricity or not under direct sunlight. The connector cable is 18AWG. The dual extension cable connectors- can be used in case the lead wire of your solar Panel, battery trickle chargers, battery maintainer is not long enough.
Attach the charge Indicator to the solar product’s lead wire. Get the 'polarity reverse Adapters' to search asin B07GPGPTFV. The male/female cigarette lighter plugs and 12V Barrel Adapter- can be used to connect the solar products to various charge controllers and using terminals.
Compatible with battery tender, noco, suaoki and the other brand battery trickle charger and maintainer. The led light will flashing if there is sufficient power. 6 cable connectors in one package-16 feet of dc extension wire cord include Battery clamps alligator plugs, Barrel plug connector, Female cigarette lighter plug, Male cigarette lighter plug, and LED charge indicatora 12volt tester for DC system.
Compatible with other brand SAE adapter. Use in 12 volt dc systems only- this battery trickle charger and maitainer sae to sae extension cable kit contains all the cables you need to connect solar panels to batteries, controllers, Schumacher, chargers and other power systems. Connect the extension cable adapter wire to the lead wire and the 12volt battery chargers.
|Brand||Sunway Solar #ad|
|Manufacturer||Sunway Solar #ad|
|Model||Battery Charger Extension Cable|
10. Renogy #ad
Wanderer 10A, Flooded and Lithium Battery, Renogy 10 Amp 12V/24V PWM Negative Ground Solar Charge Controller Compact Design w/LCD Display for AGM, Gel #adRenogy #ad
- Compact in sizeWhich makes it easy to install virtually anywhere. Wanderer10a|30a installation notes the default starting position of the wanderer controller terminal hatches are closed in the UP position that could mistakenly look like an open wire hatch.
Multiple battery adaptation Deep Cycle Sealed AGM, Gel, Flooded and Lithium battery option ready. Make sure to first lower each terminal hatch by screwing the terminals counterclockwise CCW to expose the wire terminal hatch to the open position.
Intelligent protection against reverse polarity, and reverse current. Smart 4-stage pwm chargingsmart 4-stage pwm charging bulk, short-circuit, overcharging, Boost, Float, and Equalization increases battery life and improves system performance.
Then secure each cable by rotating the screws clockwise CW to the closed position. 12v/24v automatically detectautomatically detects 12v or 24V DC system voltages, and the LCD screen and multiple LED indicators display the solar charging and battery operation information, customizable parameters, and error codes.
|Part Number||Wanderer 10A|
|Model||Wanderer 10 Amp 12V/24V|
|Warranty||1-year material warranty|