Top 9 Emitter Installation Tool – Automatic Irrigation Tubing

As an Amazon Associate I earn from qualifying purchases.

1. NA


For Easier 1/4" Inch Fitting & Emitter Insertion, NA 2-in-One Drip Irrigation Tubing Hole Punch & Fitting Insertion Tool

NA #ad - Tight fit: the punching size is 0118 inches, which can be closely fitted to eliminate waste and maintain proper pressure in the drip system.

Function: pierce holes of suitable size to connect accessories and connectors. Uses: two-in-one dropper punch and 1/4 fitting insertion tool, used for piercing and perforating when installing the dropper and micro sprinkler in the polyethylene tube. Easy to grip: the handle is made of durable plastic and non-corrosive material. Customer service: if you have any questions about our products, please contact with us, we provide mail response service and perfect after-sales service.
BrandNA #ad
Manufacturershenzhen #ad

2. Mudder


Mudder 3 Pieces 2-in-1 Drip Irrigation Hole Punch Tool Drip Tube Hole Punch Fitting Insertion Tools for 1/4 Inch Fitting Emitter Insertion Drip Sprinkler Systems

Mudder #ad - 2-in-1 punch and fitting insert: our irrigation tool kit is suitable for both drip tubing punch and 1/ 4 fitting insertion use, it can help to punch the proper hole for easier operation. Durable to use: the drip tube hole punch is mainly made of quality plastic material with material which is not easy to get corroded, sturdy and long lasting use, will bring you a nice using experience.

How to use: simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left; Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole, very convenient and easy to use.

What you get: you will receive 3 pieces of drip irrigation tubing hole punches in total, come with bright blue colors, sufficient quantity for your daily using. 3 mm/ 0118 inches, proper size can make sure that the pressure in the drip system is suitable and won't waste your materials. About size: the punch hole measures approx.
BrandMudder #ad
ManufacturerMudder #ad

3. Rain Bird


Rain Bird HPTCX Drip Irrigation 2-in-1 Combination Tubing Cutter/Hole Punch Tool

Rain Bird #ad - Cuts all sizes of drip tubing and also punches holes for drippers and 1/4" fittings. Superior ergonomic grip. Spring-loaded 2-in-1 combination tool. Highly visible purple color allows tool to be easily seen in grass, soil, bark, mulch etc. Pierces a clean hole and provides a clean, square cut with no jagged edges or crushed tubing. Hardened steel punch and surgical steel blade.
BrandRain Bird #ad
ManufacturerRAIK9 #ad
Height8.4 Inches
Length2 Inches
Weight0.01 Pounds
Width1.75 Inches
Part NumberHPTC

4. A.M. Leonard


3mm Punch Blade, for 5/8-inch to 1.25-inch Tubing, A.M. Leonard Drip Irrigation Hole Punch Tool

A.M. Leonard #ad - Adjustable for use with 16mm to 32mm 5/8 inch to 1 and 1/4 inches tubing. Miracle punch tool, with 3mm punch blade. Poly construction with metal punch - Approx 9 and 3/8 inches long. Allows a precise hole to be punched in poly tubing without slipping or driving through to the other side. Great for spray stake and drip emitter installation.
BrandA.M. Leonard #ad
Part NumberML-3



And Easy Fit with Adjustable Hook'n'Loop Straps, NoCry Home & Gardening Knee Pads, with Lightweight Waterproof EVA Foam Cushion, Soft Inner Liner

NOCRY #ad - Safe for indoor and outdoor use - perfect for kneeling when cleaning floors, gardening, and more. Fully adjustable, one size fits all - Made to be used by both men and women, the hook'n'loop straps easily stretch to fit almost any knee.

Serious knee protection in a lightweight design - made with ergonomic 05 inch thick high-quality eva foam caps to cushion your knees and protect surfaces from getting scratched, these pads are sturdy enough for real work but light enough you’ll hardly know you’re wearing them. Easy to put on and take off - with simple to adjust hook'n'loop straps, you can quickly slip the pads on or off.

These pads stay in place comfortably and securely without irritating the backs of your legs. Ribbed, painting, yoga, abrasion-resistant protective shell prevents slipping on smooth surfaces and scratching your floors. Secure fit without the pinch - contoured to fit around your knees with a flexible and elastic neoprene strap. No buckles or difficult to manage loop closures.
BrandNOCRY #ad
ManufacturerNoCry #ad
Weight0.11 Pounds
Part Number4336456321
WarrantyLIMITED LIFETIME WARRANTY - If you’re not happy with your NoCry product, please contact us within 30 days of receiving it at [email protected] to return it for free for a replacement product or to receive a full refund. Each NoCry non-electric product is warranted to be free of defects in material and workmanship for as long as the consumer owns the product. Warranty does not cover normal wear and tear, environmental factors, accidental damage, or misuse. At NoCry’s discretion, a defective product will be repaired or replaced. This warranty gives you specific legal rights, but may be superseded by any other rights or warranties in effect, which may vary from state to state. If you think you might have a defective product, please contact us at [email protected] to start the (free) procedure to determine whether your product is defective. More info at

6. Habitech


1 GPH Netafim Woodpecker Jr Pressure Compensating Dripper Emitters, 35-Pack Plus Hole Punch Tool and Goof Plugs for Drip Irrigation Systems

Habitech #ad - Ideal for greenhouse, for uniform, hydroponic, nursery, farm and other commercial irrigation systems or residential home gardens and landscape applications. Tube punch & goof plugs included. Clog resistant. Our 1 gph emitter drip irrigation kit contains 35 pack 1gph netafim emitters plus drip tubing hole punch and rack of 10 dual sided goof plug fittings for easy and fast installation.

Designed with the highest level of technology, these compact, self-cleaning 1 gph emitters have both internal check valves and anti-drainback valves and feature the widest flow path for accurate, dependable water delivery that's made them the industry standard for years. These agriculture-grade 1 gph drippers easily punch into any 1/2 or 5/8 inch drip irrigation tubing from Rain Bird, Toro or other brands using the included hole punch tool, Dig, Orbit, or push firmly onto the end of 1/4" drip tubing.

Industry's #1 drip emitter. 1 gallon per hour netafim woodpecker junior drip irrigation emitters ensure every plant on your drip irrigation system receives the same amount of water and fertilizer regardless of location, high-quality growth on any topography. Continuous self-flushing system, even while irrigating, provides these 1 gph spot emitters with superior resistance to clogging. The patented pressure compensating dripper continuously adjusts to varying water pressure, ensuring a constant flow rate under a wide pressure range from 10 to 45 PSI. Spot watering precision.
BrandHabitech #ad
ManufacturerHabitech #ad
Height0.75 Inches
Length1 Inches
Weight0.02 Pounds
Width0.75 Inches
Part NumberPD-347

7. Rain Bird


Rain Bird FT/1PK50S Drip Irrigation Barbed Fitting Insertion Tool for 1/2" Drip Tubing

Rain Bird #ad - Ergonomically shaped to fit comfortably in hand for a solid grip. Connects barbed fittings to 1/2" Drip irrigation tubing with half the effort. Firmly locks fittings into place to apply maximum leverage. Flaring portion widens tube opening for easiest possible fitting insertion. Use with all rain Bird 1/2" barbed fittings. Allows for easy full insertion of fittings for leak proof connections.
BrandRain Bird #ad
ManufacturerRAIK9 #ad
Height1.25 Inches
Length4.25 Inches
Width3.25 Inches
Part NumberFT/1PK50S

8. Orbit


Orbit 67758 Drip Tubing Cutter & Punch Tool Kit

Orbit #ad - Cuts plastic pipe up to 1 1/4 Inch in diameter. Ideal for installing a Drip irrigation system. Comfortable and durable handles. Sharp, heat-treated, steel blade.
BrandOrbit #ad
ManufacturerOrbit #ad
Height11.25 Inches
Length1.38 Inches
Weight0.55 Pounds
Width7.25 Inches
Part NumberOrbit

9. Rain Bird


Rain Bird HPUN1-1S Drip Irrigation Hole Punch Tool

Rain Bird #ad - Ensures properly sized holes to help reduce blowout of watering devices. Sharp tool creates pilot holes in 1/2" Drip irrigation tubing for barbed emitters, drippers and fittings. Tough polymer construction. Built-in stop helps avoid puncturing both sides of tubing. 2" long x 3/4" wide x 1/4" high. Reduces fatigue when setting up your Drip system.
BrandRain Bird #ad
ManufacturerRAIK9 #ad
Height0.25 Inches
Length2 Inches
Weight0.01 Pounds
Width0.75 Inches
Part NumberHPUN1-1S